
proxmark3
Hardware tool for RFID analysis, emulation, and penetration testing. Supports 125kHz, 13.56MHz protocols (MIFARE, iClass, ISO14443/15693) with key…

Hardware tool for RFID analysis, emulation, and penetration testing. Supports 125kHz, 13.56MHz protocols (MIFARE, iClass, ISO14443/15693) with key…

Multi-purpose WiFi penetration testing toolkit for M5Stack devices. Performs network scanning, evil-twin attacks, deauthentication, captive portal…

:articulated_lorry: Awesome CAN bus tools, hardware and resources for Cyber Security Researchers, Reverse Engineers, and Automotive Electronics…

Portable NFC/RFID security tool for emulating and cloning contactless smartcards, reading tags, sniffing RF traffic, and recovering Mifare access…

The open-source wireless research platform for ESP32.

The Swiss Army knife for 802.11, BLE, HID, CAN-bus, IPv4 and IPv6 networks reconnaissance and MITM attacks.

80+ feature pentesting firmware for M5Stack Cardputer-Adv. WiFi, BLE, sub-GHz (CC1101), 2.4GHz (nRF24), LoRa (SX1262), IR, BadUSB, DHCP attacks,…

P4wnP1 A.L.O.A. by MaMe82 is a framework which turns a Rapsberry Pi Zero W into a flexible, low-cost platform for pentesting, red teaming and…

Bluetooth 5 and 4.x LE sniffer for TI CC1352/CC26x2 hardware with support for extended advertising, all PHY modes, MAC/RSSI filtering, and PCAP…

Python-Based Pentesting Framework

A Hardware Hacking Tool with Web-Based CLI That Speaks Every Protocol

The C-based Firmware Patching Framework for Broadcom/Cypress WiFi Chips that enables Monitor Mode, Frame Injection and much more

A tool for logging data/testing devices with a Wiegand Interface. Can be used to create a portable RFID reader or installed directly into an existing…

Latency x-ray for undocumented hardware

Card calculator and Proxmark3 Plugin for writing and/or simulating every card type that Doppelgänger Community, Pro, Stealth, and MFAS support.

Command injection exploit for TP-Link Tapo C200 camera (CVE-2021-4045) providing root shell access via UART and reverse-engineered uhttpd binary…

This firmware is an alternative to the EvilCrowRF default firmware. Module: CC1101 - Compatible Flipper Zero file.

Simple Windows and Linux keystroke injection tool that exfiltrates stored WiFi data (SSID and password).