أدوات Seccomp

أدوات قوية لتحليل seccomp.

يهدف هذا المشروع بشكل أساسي (وليس حصريًا) إلى تحليل صناديق حماية seccomp في تحديات pwn في مسابقات CTF. بعض الميزات خاصة بمسابقات CTF، لكنها مفيدة بنفس القدر لتحليل مرشحات seccomp في العالم الحقيقي.

الميزات

Dump - يفرغ تلقائيًا BPF الخاص بـ seccomp من الملفات التنفيذية.
Disasm - يحول BPF الخاص بـ seccomp إلى صيغة قابلة للقراءة البشرية.
- مع فك ترجمة بسيط.
- مع أسماء ووسائط استدعاءات النظام كلما أمكن ذلك.
- ملون!
Asm - يجعل كتابة قواعد seccomp سهلة مثل كتابة الكود.
Emu - يحاكي قواعد seccomp.
Explain - يلخص المرشح كسياسة لكل إجراء (أي استدعاءات النظام مسموحة/مقتولة، ومتى).
Audit - يفحص المرشح بحثًا عن نقاط الضعف ومسارات الهروب (غياب حراس arch/x32، استدعاءات نظام خطيرة، ...).
دعم متعدد البنى.

التثبيت

متاح على RubyGems.org!``` $ gem install seccomp-tools

إذا فشل الترجمة، جرّب:```
sudo apt install gcc ruby-dev make

ثم قم بتثبيت seccomp-tools مرة أخرى.

واجهة سطر الأوامر

seccomp-tools```bash

$ seccomp-tools --help

Usage: seccomp-tools [--version] [--help] []

List of commands:

asm Seccomp bpf assembler.

audit Assess a seccomp filter for weaknesses and escape routes.

completion Print a shell completion script.

disasm Disassemble seccomp bpf.

dump Automatically dump seccomp bpf from executable(s).

emu Emulate seccomp rules.

explain Summarize a seccomp filter as a per-action policy.

See 'seccomp-tools --help' to read about a specific subcommand.

$ seccomp-tools dump --help

dump - Automatically dump seccomp bpf from executable(s).

NOTE: This command is only available on Linux.

Usage: seccomp-tools dump [EXEC] [options]

-c, --sh-exec Executes the given command (via sh) and dumps its seccomp.

Use this to pass arguments or pipe things to the executable.

e.g. use `-c "./bin > /dev/null"` to keep the program output out of the result.

Takes precedence over the positional argument.

-l, --limit LIMIT Dump only the first LIMIT installed filters.

Only meaningful when the input is an executable or --pid. Default: 1

An executable is killed once it reaches LIMIT.

-p, --pid PID Dump the seccomp filters installed on an existing process.

You must have CAP_SYS_ADMIN (e.g. be root) to use this option.

-t, --timeout SEC Timeout (seconds) for the execution. Default: no timeout

This option is ignored when --pid is given.

-f, --format FORMAT Output format. FORMAT can only be one of <disasm|raw|inspect>.

Default: disasm

-o, --output FILE Write output to FILE instead of stdout.

If multiple seccomp syscalls have been invoked (see --limit),

results are written to FILE, FILE_1, FILE_2, etc.

For example, with "--output out.bpf" the output files are out.bpf, out_1.bpf, ...

### dump

يتم تفريغ seccomp BPF من ملف تنفيذي باستخدام استدعاء النظام `ptrace`.

ملاحظة: يتم تشغيل الملف التنفيذي المستهدف فعليًا، لذا كن حذرًا مع الملفات الثنائية غير الموثوقة.```bash
$ file spec/binary/twctf-2016-diary
# spec/binary/twctf-2016-diary: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, for GNU/Linux 2.6.24, BuildID[sha1]=3648e29153ac0259a0b7c3e25537a5334f50107f, not stripped

$ seccomp-tools dump spec/binary/twctf-2016-diary
#  line  CODE  JT   JF      K
# =================================
#  0000: 0x20 0x00 0x00 0x00000000  A = sys_number
#  0001: 0x15 0x00 0x01 0x00000002  if (A != open) goto 0003
#  0002: 0x06 0x00 0x00 0x00000000  return KILL
#  0003: 0x15 0x00 0x01 0x00000101  if (A != openat) goto 0005
#  0004: 0x06 0x00 0x00 0x00000000  return KILL
#  0005: 0x15 0x00 0x01 0x0000003b  if (A != execve) goto 0007
#  0006: 0x06 0x00 0x00 0x00000000  return KILL
#  0007: 0x15 0x00 0x01 0x00000038  if (A != clone) goto 0009
#  0008: 0x06 0x00 0x00 0x00000000  return KILL
#  0009: 0x15 0x00 0x01 0x00000039  if (A != fork) goto 0011
#  0010: 0x06 0x00 0x00 0x00000000  return KILL
#  0011: 0x15 0x00 0x01 0x0000003a  if (A != vfork) goto 0013
#  0012: 0x06 0x00 0x00 0x00000000  return KILL
#  0013: 0x15 0x00 0x01 0x00000055  if (A != creat) goto 0015
#  0014: 0x06 0x00 0x00 0x00000000  return KILL
#  0015: 0x15 0x00 0x01 0x00000142  if (A != execveat) goto 0017
#  0016: 0x06 0x00 0x00 0x00000000  return KILL
#  0017: 0x06 0x00 0x00 0x7fff0000  return ALLOW

$ seccomp-tools dump spec/binary/twctf-2016-diary -f inspect
# "\x20\x00\x00\x00\x00\x00\x00\x00\x15\x00\x00\x01\x02\x00\x00\x00\x06\x00\x00\x00\x00\x00\x00\x00\x15\x00\x00\x01\x01\x01\x00\x00\x06\x00\x00\x00\x00\x00\x00\x00\x15\x00\x00\x01\x3B\x00\x00\x00\x06\x00\x00\x00\x00\x00\x00\x00\x15\x00\x00\x01\x38\x00\x00\x00\x06\x00\x00\x00\x00\x00\x00\x00\x15\x00\x00\x01\x39\x00\x00\x00\x06\x00\x00\x00\x00\x00\x00\x00\x15\x00\x00\x01\x3A\x00\x00\x00\x06\x00\x00\x00\x00\x00\x00\x00\x15\x00\x00\x01\x55\x00\x00\x00\x06\x00\x00\x00\x00\x00\x00\x00\x15\x00\x00\x01\x42\x01\x00\x00\x06\x00\x00\x00\x00\x00\x00\x00\x06\x00\x00\x00\x00\x00\xFF\x7F"

$ seccomp-tools dump spec/binary/twctf-2016-diary -f raw | xxd
# 00000000: 2000 0000 0000 0000 1500 0001 0200 0000   ...............
# 00000010: 0600 0000 0000 0000 1500 0001 0101 0000  ................
# 00000020: 0600 0000 0000 0000 1500 0001 3b00 0000  ............;...
# 00000030: 0600 0000 0000 0000 1500 0001 3800 0000  ............8...
# 00000040: 0600 0000 0000 0000 1500 0001 3900 0000  ............9...
# 00000050: 0600 0000 0000 0000 1500 0001 3a00 0000  ............:...
# 00000060: 0600 0000 0000 0000 1500 0001 5500 0000  ............U...
# 00000070: 0600 0000 0000 0000 1500 0001 4201 0000  ............B...
# 00000080: 0600 0000 0000 0000 0600 0000 0000 ff7f  ................

disasm

يفكك كود seccomp BPF الخام إلى تنسيق قابل للقراءة.```bash $ xxd spec/data/twctf-2016-diary.bpf | head -n 3

00000000: 2000 0000 0000 0000 1500 0001 0200 0000 ...............

00000010: 0600 0000 0000 0000 1500 0001 0101 0000 ................

00000020: 0600 0000 0000 0000 1500 0001 3b00 0000 ............;...

$ seccomp-tools disasm spec/data/twctf-2016-diary.bpf

line CODE JT JF K

=================================

0000: 0x20 0x00 0x00 0x00000000 A = sys_number

0001: 0x15 0x00 0x01 0x00000002 if (A != open) goto 0003

0002: 0x06 0x00 0x00 0x00000000 return KILL

0003: 0x15 0x00 0x01 0x00000101 if (A != openat) goto 0005

0004: 0x06 0x00 0x00 0x00000000 return KILL

0005: 0x15 0x00 0x01 0x0000003b if (A != execve) goto 0007

0006: 0x06 0x00 0x00 0x00000000 return KILL

0007: 0x15 0x00 0x01 0x00000038 if (A != clone) goto 0009

0008: 0x06 0x00 0x00 0x00000000 return KILL

0009: 0x15 0x00 0x01 0x00000039 if (A != fork) goto 0011

0010: 0x06 0x00 0x00 0x00000000 return KILL

0011: 0x15 0x00 0x01 0x0000003a if (A != vfork) goto 0013

0012: 0x06 0x00 0x00 0x00000000 return KILL

0013: 0x15 0x00 0x01 0x00000055 if (A != creat) goto 0015

0014: 0x06 0x00 0x00 0x00000000 return KILL

0015: 0x15 0x00 0x01 0x00000142 if (A != execveat) goto 0017

0016: 0x06 0x00 0x00 0x00000000 return KILL

0017: 0x06 0x00 0x00 0x7fff0000 return ALLOW

### asm

يقوم بتجميع قواعد seccomp إلى بايتات خام.
مفيد عندما تريد كتابة قواعد seccomp الخاصة بك.

يدعم تسميات القفز (jump labels) وأسماء استدعاءات النظام (syscall names). راجع الأمثلة أدناه.```bash
$ seccomp-tools asm
# asm - Seccomp bpf assembler.
#
# Usage: seccomp-tools asm IN_FILE [options]
#     -o, --output FILE                Write output to FILE instead of stdout.
#     -f, --format FORMAT              Output format. FORMAT can only be one of <inspect|raw|c_array|c_source|assembly>.
#                                      Default: inspect
#     -a, --arch ARCH                  Specify architecture.
#                                      Supported architectures are <aarch64|amd64|i386|riscv64|s390x>.
#                                      Default: auto-detected from the host machine.
#                                      Set it when the filter targets an architecture other than the host.

# Input file for asm
$ cat spec/data/libseccomp.asm
# # check if arch is X86_64
# A = arch
# A == ARCH_X86_64 ? next : dead
# A = sys_number
# A >= 0x40000000 ? dead : next
# A == write ? ok : next
# A == close ? ok : next
# A == dup ? ok : next
# A == exit ? ok : next
# return ERRNO(5)
# ok:
# return ALLOW
# dead:
# return KILL

$ seccomp-tools asm spec/data/libseccomp.asm
# " \x00\x00\x00\x04\x00\x00\x00\x15\x00\x00\b>\x00\x00\xC0 \x00\x00\x00\x00\x00\x00\x005\x00\x06\x00\x00\x00\x00@\x15\x00\x04\x00\x01\x00\x00\x00\x15\x00\x03\x00\x03\x00\x00\x00\x15\x00\x02\x00 \x00\x00\x00\x15\x00\x01\x00<\x00\x00\x00\x06\x00\x00\x00\x05\x00\x05\x00\x06\x00\x00\x00\x00\x00\xFF\x7F\x06\x00\x00\x00\x00\x00\x00\x00"

$ seccomp-tools asm spec/data/libseccomp.asm -f c_source
# #include <linux/seccomp.h>
# #include <stdio.h>
# #include <stdlib.h>
# #include <sys/prctl.h>
#
# static void install_seccomp() {
#   static unsigned char filter[] = {32,0,0,0,4,0,0,0,21,0,0,8,62,0,0,192,32,0,0,0,0,0,0,0,53,0,6,0,0,0,0,64,21,0,4,0,1,0,0,0,21,0,3,0,3,0,0,0,21,0,2,0,32,0,0,0,21,0,1,0,60,0,0,0,6,0,0,0,5,0,5,0,6,0,0,0,0,0,255,127,6,0,0,0,0,0,0,0};
#   struct prog {
#     unsigned short len;
#     unsigned char *filter;
#   } rule = {
#     .len = sizeof(filter) >> 3,
#     .filter = filter
#   };
#   if(prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0) < 0) { perror("prctl(PR_SET_NO_NEW_PRIVS)"); exit(2); }
#   if(prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, &rule) < 0) { perror("prctl(PR_SET_SECCOMP)"); exit(2); }
# }

$ seccomp-tools asm spec/data/libseccomp.asm -f assembly
# install_seccomp:
#   push   rbp
#   mov    rbp, rsp
#   push   38
#   pop    rdi
#   push   0x1
#   pop    rsi
#   xor    eax, eax
#   mov    al, 0x9d
#   syscall
#   push   22
#   pop    rdi
#   lea    rdx, [rip + _filter]
#   push   rdx /* .filter */
#   push   _filter_end - _filter >> 3 /* .len */
#   mov    rdx, rsp
#   push   0x2
#   pop    rsi
#   xor    eax, eax
#   mov    al, 0x9d
#   syscall
#   leave
#   ret
# _filter:
# .ascii "\040\000\000\000\004\000\000\000\025\000\000\010\076\000\000\300\040\000\000\000\000\000\000\000\065\000\006\000\000\000\000\100\025\000\004\000\001\000\000\000\025\000\003\000\003\000\000\000\025\000\002\000\040\000\000\000\025\000\001\000\074\000\000\000\006\000\000\000\005\000\005\000\006\000\000\000\000\000\377\177\006\000\000\000\000\000\000\000"
# _filter_end:


# let's asm then disasm!
$ seccomp-tools asm spec/data/libseccomp.asm -f raw | seccomp-tools disasm -
#  line  CODE  JT   JF      K
# =================================
#  0000: 0x20 0x00 0x00 0x00000004  A = arch
#  0001: 0x15 0x00 0x08 0xc000003e  if (A != ARCH_X86_64) goto 0010
#  0002: 0x20 0x00 0x00 0x00000000  A = sys_number
#  0003: 0x35 0x06 0x00 0x40000000  if (A >= 0x40000000) goto 0010
#  0004: 0x15 0x04 0x00 0x00000001  if (A == write) goto 0009
#  0005: 0x15 0x03 0x00 0x00000003  if (A == close) goto 0009
#  0006: 0x15 0x02 0x00 0x00000020  if (A == dup) goto 0009
#  0007: 0x15 0x01 0x00 0x0000003c  if (A == exit) goto 0009
#  0008: 0x06 0x00 0x00 0x00050005  return ERRNO(5)
#  0009: 0x06 0x00 0x00 0x7fff0000  return ALLOW
#  0010: 0x06 0x00 0x00 0x00000000  return KILL

منذ الإصدار v1.6.0 [لم يُصدر بعد]، تحول asm إلى محلل يعتمد على yacc، مما يتيح صياغة أكثر مرونة وبديهية!```bash $ cat spec/data/example.asm

# An example of supported assembly syntax

if (A == X)

goto next # 'next' is a reserved label, means the next statement ("A = args[0]" in this example)

else

goto err_label # custom defined label

A = args[0]

if (

A # put a comment here is also valid

== 0x123

) goto disallow

if (! (A & 0x1337)) # support bang in if-conditions

goto 0 # equivalent to 'goto next'

else goto 2 # goto $ + 2, 'mem[0] = A' in this example

A = sys_number

A = instruction_pointer >> 32

mem[0] = A

A = data[4] # equivalent to 'A = arch'

err_label: return ERRNO(1337)

disallow:

return KILL

$ seccomp-tools asm spec/data/example.asm -f raw | seccomp-tools disasm -

line CODE JT JF K

=================================

0000: 0x1d 0x00 0x07 0x00000000 if (A != X) goto 0008

0001: 0x20 0x00 0x00 0x00000010 A = args[0]

0002: 0x15 0x06 0x00 0x00000123 if (A == 0x123) goto 0009

0003: 0x45 0x02 0x00 0x00001337 if (A & 0x1337) goto 0006

0004: 0x20 0x00 0x00 0x00000000 A = sys_number

0005: 0x20 0x00 0x00 0x0000000c A = instruction_pointer >> 32

0006: 0x02 0x00 0x00 0x00000000 mem[0] = A

0007: 0x20 0x00 0x00 0x00000004 A = arch

0008: 0x06 0x00 0x00 0x00050539 return ERRNO(1337)

0009: 0x06 0x00 0x00 0x00000000 return KILL

The output of `seccomp-tools disasm <file> --asm-able` is valid input for `asm`:```bash
$ seccomp-tools disasm spec/data/x32.bpf --asm-able
# 0000: A = arch
# 0001: if (A != ARCH_X86_64) goto 0011
# 0002: A = sys_number
# 0003: if (A < 0x40000000) goto 0011
# 0004: if (A == x32_read) goto 0011
# 0005: if (A == x32_write) goto 0011
# 0006: if (A == x32_iopl) goto 0011
# 0007: if (A != x32_mmap) goto 0011
# 0008: A = args[0]
# 0009: if (A == 0x0) goto 0011
# 0010: return ERRNO(5)
# 0011: return ALLOW


# disasm then asm then disasm!
$ seccomp-tools disasm spec/data/x32.bpf --asm-able | seccomp-tools asm - -f raw | seccomp-tools disasm -
#  line  CODE  JT   JF      K
# =================================
#  0000: 0x20 0x00 0x00 0x00000004  A = arch
#  0001: 0x15 0x00 0x09 0xc000003e  if (A != ARCH_X86_64) goto 0011
#  0002: 0x20 0x00 0x00 0x00000000  A = sys_number
#  0003: 0x35 0x00 0x07 0x40000000  if (A < 0x40000000) goto 0011
#  0004: 0x15 0x06 0x00 0x40000000  if (A == x32_read) goto 0011
#  0005: 0x15 0x05 0x00 0x40000001  if (A == x32_write) goto 0011
#  0006: 0x15 0x04 0x00 0x400000ac  if (A == x32_iopl) goto 0011
#  0007: 0x15 0x00 0x03 0x40000009  if (A != x32_mmap) goto 0011
#  0008: 0x20 0x00 0x00 0x00000010  A = addr # x32_mmap(addr, len, prot, flags, fd, pgoff)
#  0009: 0x15 0x01 0x00 0x00000000  if (A == 0x0) goto 0011
#  0010: 0x06 0x00 0x00 0x00050005  return ERRNO(5)
#  0011: 0x06 0x00 0x00 0x7fff0000  return ALLOW

Emu

يحاكي seccomp عند تمرير sys_nr وarg0 وarg1 وما إلى ذلك.```bash $ seccomp-tools emu --help

emu - Emulate seccomp rules.

Usage: seccomp-tools emu [options] BPF_FILE [sys_nr [arg0 [arg1 ... arg5]]]

-a, --arch ARCH Specify architecture.

Supported architectures are <aarch64|amd64|i386|riscv64|s390x>.

Default: auto-detected from the host machine.

Set it when the filter targets an architecture other than the host.

-q, --[no-]quiet Run quietly, only show emulation result.

-i, --ip=VAL Set instruction pointer.

$ seccomp-tools emu spec/data/libseccomp.bpf write 0x3

line CODE JT JF K

=================================

0000: 0x20 0x00 0x00 0x00000004 A = arch

0001: 0x15 0x00 0x08 0xc000003e if (A != ARCH_X86_64) goto 0010

0002: 0x20 0x00 0x00 0x00000000 A = sys_number

0003: 0x35 0x06 0x00 0x40000000 if (A >= 0x40000000) goto 0010

0004: 0x15 0x04 0x00 0x00000001 if (A == write) goto 0009

0005: 0x15 0x03 0x00 0x00000003 if (A == close) goto 0009

0006: 0x15 0x02 0x00 0x00000020 if (A == dup) goto 0009

0007: 0x15 0x01 0x00 0x0000003c if (A == exit) goto 0009

0008: 0x06 0x00 0x00 0x00050005 return ERRNO(5)

0009: 0x06 0x00 0x00 0x7fff0000 return ALLOW

0010: 0x06 0x00 0x00 0x00000000 return KILL

return ALLOW at line 0009

### الشرح

يلخّص عامل تصفية كاملاً كسياسة لكل إجراء: أي استدعاءات النظام تنتهي بـ `ALLOW` أو `KILL` أو `ERRNO`، وما إلى ذلك،
وتحت أي قيود على الوسائط. يمكن أن يكون الإدخال ملف BPF مُفرَّغاً، أو ملفاً تنفيذياً (يُفرَّغ seccomp الخاص به أولاً، مثل `dump`)، أو عملية قيد التشغيل عبر `--pid`.```bash
$ seccomp-tools explain --help
# explain - Summarize a seccomp filter as a per-action policy.
#
# Usage: seccomp-tools explain [options] [BPF_FILE|EXEC]
#     -c, --sh-exec <command>          Executes the given command (via sh) and explains its seccomp.
#                                      Use this to pass arguments or pipe things to the executable.
#                                      e.g. use `-c "./bin > /dev/null"` to keep the program output out of the result.
#                                      Takes precedence over the positional argument.
#     -l, --limit LIMIT                Explain only the first LIMIT installed filters.
#                                      Only meaningful when the input is an executable or --pid. Default: 1
#                                      An executable is killed once it reaches LIMIT.
#     -p, --pid PID                    Explain the seccomp filters installed on an existing process.
#                                      You must have CAP_SYS_ADMIN (e.g. be root) to use this option.
#     -t, --timeout SEC                Timeout (seconds) for the execution. Default: no timeout
#                                      This option is ignored when --pid is given.
#     -a, --arch ARCH                  Specify architecture.
#                                      Supported architectures are <aarch64|amd64|i386|riscv64|s390x>.
#                                      Default: auto-detected from the host machine.
#                                      Set it when the filter targets an architecture other than the host.
#                                      With an executable or --pid the architecture is auto-detected instead.

$ seccomp-tools explain spec/data/libseccomp.bpf -a amd64
# Seccomp policy for spec/data/libseccomp.bpf
#
# Architecture: amd64
#
#   ALLOW:
#     write, close, dup, exit
#
#   ERRNO(5):
#     <default> (any other syscall)
#
#   KILL:
#     sys_number >= 0x40000000  (x32 ABI)
#
# Other architectures: KILL

مثال أكثر تعقيدًا - فلتر 0CTF/TCTF 2023 "Nothing is True"، الذي يحتوي على قوائم سماح منفصلة لـ 32/64-بت وفحوصات وسائط على open وmmap وexecve:```bash $ seccomp-tools explain spec/data/tctf-2023-nothing-is-true.bpf -a amd64

Seccomp policy for spec/data/tctf-2023-nothing-is-true.bpf

Architecture: i386

ALLOW:

exit, read, write, brk, mmap, munmap, exit_group

KILL:

(any other syscall)

Architecture: amd64

ALLOW:

close, munmap, brk, exit, exit_group

open when filename == 0x31337 && flags == 0x0

mmap when prot == 0x2

execve when filename == 0x7ffea12f7d0e

KILL:

sys_number >= 0x40000000 (x32 ABI)

(any other syscall)

Other architectures: KILL

### التدقيق

يفحص عامل تصفية بحثًا عن نقاط الضعف ومسارات الهروب المحتملة - بنية مفقودة أو حارس x32،
إعداد افتراضي متساهل (قائمة حظر)، فجوات في استدعاءات النظام المكافئة (مثل حظر `execve` ولكن ليس `execveat`)،
سلسلة فتح/قراءة/كتابة، أو استدعاءات نظام خطيرة يمكن الوصول إليها كـ `ALLOW` - ويُبلغ عن كل منها مع
درجة خطورة. يعمل على كل بنية مدعومة (يتم تطبيق الخصائص الخاصة بالبنية مثل x32 في amd64
فقط حيثما توجد)، ويأخذ نفس المدخلات مثل `explain` (ملف BPF، أو ملف قابل للتنفيذ، أو
`--pid`).```bash
$ seccomp-tools audit --help
# audit - Assess a seccomp filter for weaknesses and escape routes.
#
# Usage: seccomp-tools audit [options] [BPF_FILE|EXEC]
#     -c, --sh-exec <command>          Executes the given command (via sh) and audits its seccomp.
#                                      Use this to pass arguments or pipe things to the executable.
#                                      e.g. use `-c "./bin > /dev/null"` to keep the program output out of the result.
#                                      Takes precedence over the positional argument.
#     -l, --limit LIMIT                Audit only the first LIMIT installed filters.
#                                      Only meaningful when the input is an executable or --pid. Default: 1
#                                      An executable is killed once it reaches LIMIT.
#     -p, --pid PID                    Audit the seccomp filters installed on an existing process.
#                                      You must have CAP_SYS_ADMIN (e.g. be root) to use this option.
#     -t, --timeout SEC                Timeout (seconds) for the execution. Default: no timeout
#                                      This option is ignored when --pid is given.
#     -a, --arch ARCH                  Specify architecture.
#                                      Supported architectures are <aarch64|amd64|i386|riscv64|s390x>.
#                                      Default: auto-detected from the host machine.
#                                      Set it when the filter targets an architecture other than the host.
#                                      With an executable or --pid the architecture is auto-detected instead.
#     -f, --format FORMAT              Output format, one of <human|json>.
#                                      Default: human

تدقيق قائمة حظر تحتوي على عدة مسارات هروب (مرشح "diary" من مسابقة TokyoWesterns CTF 2016):```bash $ seccomp-tools audit spec/data/twctf-2016-diary.bpf -a amd64

Seccomp audit of spec/data/twctf-2016-diary.bpf

Architectures: amd64

[HIGH] Architecture is never validated

The filter checks syscall numbers without ever comparing data[4] (arch). Numbers mean different syscalls under

another AUDIT_ARCH, so the checks can be dodged by invoking through a different ABI (e.g. i386 numbering on amd64).

fix: Compare data[4] against your AUDIT_ARCH_* and KILL every architecture you do not explicitly handle.

[HIGH] io_uring_setup is allowed (amd64)

io_uring_setup reaches ALLOW - reads/writes/opens as ring operations, bypassing filters on those syscalls.

fix: Block io_uring_setup unless the program genuinely needs it.

[HIGH] process_vm_readv is allowed (amd64)

process_vm_readv reaches ALLOW - read another process's memory.

fix: Block process_vm_readv unless the program genuinely needs it.

[HIGH] process_vm_writev is allowed (amd64)

process_vm_writev reaches ALLOW - write another process's memory.

fix: Block process_vm_writev unless the program genuinely needs it.

[HIGH] ptrace is allowed (amd64)

ptrace reaches ALLOW - inspect/inject into other processes.

fix: Block ptrace unless the program genuinely needs it.

[HIGH] A file can be opened and its contents copied out (amd64)

openat2, read and write all reach ALLOW, so the contents of an arbitrary file (e.g. the flag) can be copied straight

back out.

fix: Deny the open-family syscalls unless the program genuinely needs arbitrary files.

[HIGH] Default action is ALLOW (denylist) (amd64)

Any syscall the filter does not explicitly block is allowed; a denylist is bypassable by any syscall the author

overlooked.

fix: Use an allowlist: default to KILL/ERRNO and permit only the needed syscalls.

[HIGH] open/openat blocked but openat2 allowed (amd64)

open, openat denied, but the equivalent openat2 reaches ALLOW - same capability, different syscall number.

fix: Deny every equivalent in the group: also block openat2.

[HIGH] x32 ABI is not guarded (amd64)

Syscalls blocked by their native number are reachable via their x32 number (nr | 0x40000000): open, clone, fork,

vfork, execve, creat, openat, execveat.

fix: After the arch check, KILL when sys_number >= 0x40000000 (or jset 0x40000000).

[MEDIUM] connect is allowed (amd64)

connect reaches ALLOW - network access (exfiltration).

fix: Block connect unless the program genuinely needs it.

[MEDIUM] socket is allowed (amd64)

socket reaches ALLOW - network access (exfiltration).

fix: Block socket unless the program genuinely needs it.

[MEDIUM] fork/vfork/clone blocked but clone3 allowed (amd64)

fork, vfork, clone denied, but the equivalent clone3 reaches ALLOW - same capability, different syscall number.

fix: Deny every equivalent in the group: also block clone3.

استخدم `--format json` للـ CI أو الأدوات:```bash
$ seccomp-tools audit spec/data/gctf-2019-quals-caas.bpf -a amd64 -f json
# {
#   "stacked_filters": 1,
#   "reports": [
#     {
#       "source": "spec/data/gctf-2019-quals-caas.bpf",
#       "arches": [
#         "amd64"
#       ],
#       "truncated": false,
#       "findings": [
#         {
#           "id": "dangerous-allow",
#           "severity": "medium",
#           "title": "connect is allowed",
#           "detail": "connect reaches ALLOW - network access (exfiltration).",
#           "arch": "amd64",
#           "syscalls": [
#             "connect"
#           ],
#           "condition": null,
#           "remediation": "Block connect unless the program genuinely needs it."
#         },
#         {
#           "id": "dangerous-allow",
#           "severity": "medium",
#           "title": "socket is allowed",
#           "detail": "socket reaches ALLOW - network access (exfiltration).",
#           "arch": "amd64",
#           "syscalls": [
#             "socket"
#           ],
#           "condition": "family == 0x2 && type == 0x1 && protocol == 0x0",
#           "remediation": "Block socket unless the program genuinely needs it."
#         }
#       ]
#     }
#   ]
# }

إكمال الصدفة

يُظهر الأمر seccomp-tools completion <bash|zsh|fish> سكربت إكمال للصدفة المحددة. قم بتحميله من ملف بدء التشغيل الخاص بصدفتك:```bash

bash (~/.bashrc)

eval "$(seccomp-tools completion bash)"

zsh (~/.zshrc, after `compinit`)

eval "$(seccomp-tools completion zsh)"

fish (~/.config/fish/config.fish)

seccomp-tools completion fish | source

لتجنب تكلفة البدء في تقييمه في كل مرة، اكتب السكربت إلى الدليل الذي يحمّل منه الصدفة إكمالات الأوامر بدلاً من ذلك، على سبيل المثال `seccomp-tools completion zsh > "${fpath[1]}/_seccomp-tools"`.

## لقطات الشاشة

### Dump
![dump](https://raw.githubusercontent.com/david942j/seccomp-tools/master/examples/dump-diary.png?raw=true)

### Emu
![emu](https://raw.githubusercontent.com/david942j/seccomp-tools/master/examples/emu-libseccomp.png?raw=true)

![emu](https://raw.githubusercontent.com/david942j/seccomp-tools/master/examples/emu-amigo.png?raw=true)

## البنى المدعومة

- [x] x86_64
- [x] x32
- [x] x86
- [x] arm64 (@saagarjha)
- [x] s390x (@iii-i)
- [x] riscv64

طلبات السحب التي تضيف دعمًا لمزيد من البنى مرحب بها!

## التطوير

أوصي باستخدام [rbenv](https://github.com/rbenv/rbenv) لإدارة بيئة Ruby الخاصة بك.

### الإعداد

- تثبيت bundler
  - `$ gem install bundler`
- استنساخ المصدر
  - `$ git clone https://github.com/david942j/seccomp-tools && cd seccomp-tools`
- تثبيت التبعيات
  - `$ bundle install`

### تشغيل الاختبارات

`$ bundle exec rake`

## أحتاجك

أي اقتراحات أو طلبات ميزات مرحب بها!
لا تتردد في فتح قضايا أو إرسال طلبات سحب.
وإذا أعجبك هذا المشروع، ففكر في منحه [نجمة](https://github.com/david942j/seccomp-tools/stargazers) :grimacing:

اقرأ المزيد

seccomp-tools v1.7.1

الفئات

seccomp-tools v1.7.1

أدوات Seccomp

الميزات

التثبيت

واجهة سطر الأوامر

seccomp-tools```bash

Usage: seccomp-tools [--version] [--help] []

List of commands:

asm Seccomp bpf assembler.

audit Assess a seccomp filter for weaknesses and escape routes.

completion Print a shell completion script.

disasm Disassemble seccomp bpf.

dump Automatically dump seccomp bpf from executable(s).

emu Emulate seccomp rules.

explain Summarize a seccomp filter as a per-action policy.

See 'seccomp-tools --help' to read about a specific subcommand.

dump - Automatically dump seccomp bpf from executable(s).

NOTE: This command is only available on Linux.

Usage: seccomp-tools dump [EXEC] [options]

-c, --sh-exec Executes the given command (via sh) and dumps its seccomp.

Use this to pass arguments or pipe things to the executable.

e.g. use -c "./bin > /dev/null" to keep the program output out of the result.

Takes precedence over the positional argument.

-l, --limit LIMIT Dump only the first LIMIT installed filters.

Only meaningful when the input is an executable or --pid. Default: 1

An executable is killed once it reaches LIMIT.

-p, --pid PID Dump the seccomp filters installed on an existing process.

You must have CAP_SYS_ADMIN (e.g. be root) to use this option.

-t, --timeout SEC Timeout (seconds) for the execution. Default: no timeout

This option is ignored when --pid is given.

-f, --format FORMAT Output format. FORMAT can only be one of <disasm|raw|inspect>.

Default: disasm

-o, --output FILE Write output to FILE instead of stdout.

If multiple seccomp syscalls have been invoked (see --limit),

results are written to FILE, FILE_1, FILE_2, etc.

For example, with "--output out.bpf" the output files are out.bpf, out_1.bpf, ...

disasm

00000000: 2000 0000 0000 0000 1500 0001 0200 0000 ...............

00000010: 0600 0000 0000 0000 1500 0001 0101 0000 ................

00000020: 0600 0000 0000 0000 1500 0001 3b00 0000 ............;...

line CODE JT JF K

=================================

0000: 0x20 0x00 0x00 0x00000000 A = sys_number

0001: 0x15 0x00 0x01 0x00000002 if (A != open) goto 0003

0002: 0x06 0x00 0x00 0x00000000 return KILL

0003: 0x15 0x00 0x01 0x00000101 if (A != openat) goto 0005

0004: 0x06 0x00 0x00 0x00000000 return KILL

0005: 0x15 0x00 0x01 0x0000003b if (A != execve) goto 0007

0006: 0x06 0x00 0x00 0x00000000 return KILL

0007: 0x15 0x00 0x01 0x00000038 if (A != clone) goto 0009

0008: 0x06 0x00 0x00 0x00000000 return KILL

0009: 0x15 0x00 0x01 0x00000039 if (A != fork) goto 0011

0010: 0x06 0x00 0x00 0x00000000 return KILL

0011: 0x15 0x00 0x01 0x0000003a if (A != vfork) goto 0013

0012: 0x06 0x00 0x00 0x00000000 return KILL

0013: 0x15 0x00 0x01 0x00000055 if (A != creat) goto 0015

0014: 0x06 0x00 0x00 0x00000000 return KILL

0015: 0x15 0x00 0x01 0x00000142 if (A != execveat) goto 0017

0016: 0x06 0x00 0x00 0x00000000 return KILL

0017: 0x06 0x00 0x00 0x7fff0000 return ALLOW

# An example of supported assembly syntax

if (A == X)

goto next # 'next' is a reserved label, means the next statement ("A = args[0]" in this example)

else

goto err_label # custom defined label

A = args[0]

if (

A # put a comment here is also valid

== 0x123

) goto disallow

if (! (A & 0x1337)) # support bang in if-conditions

goto 0 # equivalent to 'goto next'

else goto 2 # goto $ + 2, 'mem[0] = A' in this example

A = sys_number

A = instruction_pointer >> 32

mem[0] = A

A = data[4] # equivalent to 'A = arch'

err_label: return ERRNO(1337)

disallow:

return KILL

e.g. use `-c "./bin > /dev/null"` to keep the program output out of the result.