Features

Features:
  - Post-Exploitation modules to control and tinker with the device you are connected to.
  - Scanners to search for vulnerable android devices across the world to exploit.
  - Options for managing how many devices you have connected.
  - Options for checking whether the devices you are connected to are online or offline.
  - IP-Lookup for retrieving information on a certain IP.
  - Options to dump the IP Addresses of the vulnerable android devices. [This makes your life easier so you dont have to find it yourself]

获取所需的 API 密钥

在 censys.io 上创建一个账户，然后前往你的账户页面获取免费的 api_id 和 api_secret 密钥，打开 'adbnet.py' 并在以下位置填写你的 api id 和 api 密钥：

在 shodan.io 上创建一个账户，前往你的账户获取免费的 api 密钥，复制后打开 'adbnet.py' 并在以下位置填写你的 api 密钥：

Simple Tutorial

First, run the 'dump shodan' or 'dump censy' (dump shodan is recommended) command to 
dump the IP addresses of the vulnerable devices.

Then, after you find an IP-address you want to try, run the 'connect' command and you will be prompted to enter
the target IP address, once you enter the target ip address, you will be prompter to enter the port. For the port,
you can try entering '5555' or '4444' since those are the most common ports. If you want, you can try finding the
specific port yourself, but it might take some time.

Now AdbNet will now try to connect to the vulnerable android device.
If it fails to connect, try another IP.

If you manage to connect to a device, now you can check if you are really connected by using the 'devices' command.

< Warning! > You can only be connected to one device at a time! To kill the sessions use the 'killall' command! < Warning! >

To open a shell and execute commands on the device, use the 'terminal' command.

To run post-exploitation modules, run the 'post' command for the post-exploitation menu to load. Then, you
can run any module you like.

REMEMBER: IF YOU WANT TO CONNECT TO A DIFFERENT DEVICE, RUN THE 'killall' COMMAND, AND REPEAT THE PROCESS AGAIN.

安装/运行方法

sudo apt install pq
sudo apt install adb
pip3 install colorama
pip3 install requests
python3 adbnet.py or python adbnet.py or py adbnet.py

TIP: For people that are new to this, if you are having issues install a certain python module, just do this: pip3 install <modulename>

截图

致谢

https://github.com/0x1CA3

贡献 🎉

欢迎所有贡献，只需打开 Issue 或 Pull request 即可。