Skip to content
KitploitKITPLOIT
도구익스플로잇블로그
Log in
제출
도구익스플로잇블로그
제출

해킹, 침투 테스트 및 사이버 보안 도구를 당신의 보안 무기고에!

Kitploit은 해킹, 사이버 보안 및 침투 테스트 도구 디렉토리입니다. 최신 프로젝트 업데이트를 발견하여 취약점을 찾고, 시스템을 분석하고, 테스트를 자동화하고, 보안을 강화하세요.

피드문의개인정보© 2026 Kitploit

도구 디렉토리

카테고리

모든 카테고리 보기
Loading categories
sslscan — Fast SSL/TLS scanner that discovers supported cipher suites, protocols, and vulnerabilities (Heartbleed, POODLE, CRIME) with certificate chain analysis and key exchange enumeration. | Kitploit
도구/GitHubGitHub/rbsec/sslscan
Vulnerability ScannersNetwork SecurityCryptography
GitHubrbsec/sslscan

sslscan

Fast SSL/TLS scanner that discovers supported cipher suites, protocols, and vulnerabilities (Heartbleed, POODLE, CRIME) with certificate chain analysis and key exchange enumeration.

저장소 보기
2.6k414788일 전Kitploit 검토 완료
공유
요청한 언어로 콘텐츠를 사용할 수 없습니다. 영어 버전을 표시합니다.
# README

[![ci](https://github.com/rbsec/sslscan/actions/workflows/ci.yml/badge.svg)](https://github.com/rbsec/sslscan/actions/workflows/ci.yml)

This is a fork of ioerror's version of sslscan (the original readme of which is included below) by rbsec ([email protected]).

Key changes are as follows:

* Highlight SSLv2 and SSLv3 ciphers in output.
* Highlight CBC ciphers on SSLv3 (POODLE).
* Highlight 3DES and RC4 ciphers in output.
* Highlight PFS+GCM ciphers as good in output.
* Highlight NULL (0 bit), weak (<40 bit) and medium (40 < n <= 56) ciphers in output.
* Highlight anonymous (ADH and AECDH) ciphers in output (purple).
* Hide certificate information by default (display with `--show-certificate`).
* Hide rejected ciphers by default (display with `--failed`).
* Added TLSv1.1, TLSv1.2 and TLSv1.3 support.
* Supports IPv6  (can be forced with `--ipv6`).
* Check for TLS compression (CRIME, disable with `--no-compression`).
* Disable cipher suite checking `--no-ciphersuites`.
* Disable coloured output `--no-colour`.
* Removed undocumented -p output option.
* Added check for OpenSSL HeartBleed (CVE-2014-0160, disable with `--no-heartbleed`).
* Flag certificates signed with MD5 or SHA-1, or with short (<2048 bit) RSA keys.
* Support scanning RDP servers with `--rdp` (credit skettler).
* Added option to specify socket timeout.
* Added option for static compilation (credit dmke).
* Added `--sleep` option to pause between requests.
* Disable output for anything than specified checks `--no-preferred`.
* Determine the list of CAs acceptable for client certificates `--show-client-cas`.
* Experimental build support on OS X (credit MikeSchroll).
* Flag some self-signed SSL certificates.
* Experimental Windows support (credit jtesta).
* Display EC curve names and DHE key lengths with OpenSSL >= 1.0.2 `--no-cipher-details`.
* Flag weak DHE keys with OpenSSL >= 1.0.2 `--cipher-details`.
* Flag expired certificates.
* Flag TLSv1.0 and TLSv1.1 protocols in output as weak.
* Experimental OS X support (static building only).
* Support for scanning PostgreSQL servers (credit nuxi).
* Check for TLS Fallback SCSV support.
* Added StartTLS support for LDAP `--starttls-ldap`.
* Added SNI support `--sni-name` (credit Ken).
* Support STARTTLS for MySQL (credit bk2017).
* Check for supported key exchange groups.
* Check for supported server signature algorithms.
* Display IANA/RFC cipher names `--iana-names`
* Display the full certifiate chain `--show-certificates`
* Added option to scan groups on all supported protocols `--all-groups`.

# Compiling

## Building on Linux

It is recommended to ignore the OpenSSL system installation and statically build against your own version. Although this results in a more resource-heavy `sslscan` binary (file size, memory consumption, etc.), this allows some additional checks such as TLS compression. Note that as of sslscan version 2.2.0, the minimum OpenSSL version required by sslscan is 3.5.0 (LTS), so if your distro ships an older version then building against it will not work, and you will have to do a static build.

To compile your own OpenSSL version, you'll probably need to install the OpenSSL build dependencies. The commands below can be used to do this on Debian.

    apt install git zlib1g-dev make gcc

Then run

    make static

This will clone the [OpenSSL repository](https://github.com/openssl/openssl), and configure/compile/test OpenSSL prior to compiling `sslscan`.

**Please note:** By default, OpenSSL is compiled with `gcc` without further customization. To compile with `clang`, install build dependencies using the commands below.

    apt install git zlib1g-dev make clang

Then run

    make static CC=clang

You can verify whether you have a statically linked OpenSSL version, by checking whether the version listed by `sslscan --version` has the `-static` suffix.

## Building with Docker

Ensure that you local Docker installation is functional, and the build the container with:

    make docker

Or manually with:

    docker build -t sslscan:sslscan .

You can then run sslscan with:

    docker run --rm -ti sslscan:sslscan --help

## Building on Windows

Thanks to a patch by jtesta, sslscan can now be compiled on Windows. This can either be done natively or by cross-compiling from Linux. See INSTALL for instructions.

Note that sslscan was originally written for Linux, and has not been extensively tested on Windows. As such, the Windows version should be considered experimental.

Pre-build cross-compiled Windows binaries are available on the [GitHub Releases Page](https://github.com/rbsec/sslscan/releases).

## Building on macOS (formerly named OS X)
There is experimental support for statically building on macOS (formerly named OS X), however this should be considered unsupported. You may need to install any dependencies required to compile OpenSSL from source on macOS (formerly named OS X). Once you have, just run:

    make static

# Notes

## XML Output Changes
A potentially breaking change has been made to the XML output in version **2.0.0-beta4**. Previously, multiple `<certificate>` elements could be returned (one by default, and a second one if `--show-certificate` was used).

The key changes are:

* A new parent `<certificates>` element that will contain the `<certificate>` elements.
* `<certificate>` elements have a new `type` attribute, which can either be:
  * `short` for the default output.
  * `full` for when `--show-certificate` is used.
* There will potentially be more than one certificate of each type returned on servers that have multiple certificates with different signature algorithms (see discussion in issue [#208](https://github.com/rbsec/sslscan/issues/208)).
* The `<signature-algorithm>` element in a `<certificate>` no longer contains the "Signature Algorithm:" prefix, or the spacing and newline.

If you are using the XML output, then you may need to make changes to your parser.

## Certificate Names

The short certificate output shows the common name (CN) for subjects and issuers
with exactly one CN. If a name has no CN or multiple CNs, sslscan shows the full
distinguished name instead, so no CN is silently omitted. This applies to both
terminal output and the existing XML `subject` and `issuer` elements.

To test this output against local TLS servers without Docker, build sslscan and
run `python3 docker_test/test_certificate_names.py`. The test needs Python 3 and
an `openssl` command on PATH; it only connects to loopback addresses.

## Cipher Strength in Bits

The `bits` column in the cipher suite output reports the cipher's effective security strength as returned by OpenSSL, which does not necessarily its encryption key length.

This is most notable in `3DES` ciphers (which are listed as 112 bits of effective strength due to the parity bits in the keys and meet-in-the-middle attacks), and in `CCM8` ciphers (which are listed as 64 bits of effective strength due to the short authentication tag, as discussed in the [upstream OpenSSL pull request](https://github.com/openssl/openssl/pull/16652)).

The same value is written to the `bits` attribute of each `<cipher>` in XML output, and the `<strength>` attribute is a broader consideration of the cipher strength, aligned to the colour in the sslscan output.

# Original (ioerror) README
This is a fork of sslscan.c to better support STARTTLS.

The original home page of sslscan is:

    http://www.titania.co.uk

sslscan was originally written by:

    Ian Ventura-Whiting

The current home page of this fork (until upstream merges a finished patch) is:

    http://www.github.com/ioerror/sslscan

Most of the pre-TLS protocol setup was inspired by the OpenSSL s_client.c
program. The goal of this fork is to eventually merge with the original
project after the STARTTLS setup is polished.

Some of the OpenSSL setup code was borrowed from The Tor Project's Tor program.
Thus it is likely proper to comply with the BSD license by saying:
    Copyright (c) 2007-2010, The Tor Project, Inc.
도구 다운로드

인기

모두 보기 →

커뮤니티에서 가장 많이 사용되는 도구를 찾아보세요.

  • 1

    OsintHunter

    letox4/osinthunter

    🎯 궁극의 OSINT 툴킷: 조사 그래프, 신뢰도 점수 산정, 별칭 패밀리, 지도, 타임라인 및 보고서. 49개 모듈, 400개 이상 사이트, API 키 불필요.

    906
  • 2

    ghostlock-app

    yukonga/ghostlock-app

    # GhostLock 원탭 실행 앱 (CVE-2026-43499)

    725
  • 3

    looking-glass

    anonghosty/looking-glass

    Shadowserver 보고서를 MongoDB로 수집하고 이를 대화형 지도, 분석, 발견 사항, 권고 및 경영진 대시보드로 재생하는 CSIRT 플랫폼입니다.

    442
  • 4

    wifit3

    derv82/wifit3

    Wifite지만 USB 전용 및 크로스 플랫폼.

    434
  • 5

    jumpserver

    jumpserver/jumpserver

    JumpServer는 오픈소스 권한 접근 관리(PAM) 플랫폼으로, DevOps 및 IT 팀이 웹 브라우저를 통해 SSH, RDP, Kubernetes, 데이터베이스 및 RemoteApp 엔드포인트에 주문형 보안 액세스를 제공합니다.

    412
  • 6

    SafeLine

    chaitin/safeline

    악성 HTTP 트래픽을 필터링하고 SQL 인젝션, XSS, 봇 공격을 차단하며, 속도 제한 및 동적 HTML/JS 암호화를 제공하는 자체 호스팅 WAF 및 리버스 프록시입니다.

    360

모든 도구 탐색

도구 컬렉션을 둘러보세요

모든 도구 보기 →