
openocd
Official OpenOCD Read-Only Mirror (no pull requests)

Official OpenOCD Read-Only Mirror (no pull requests)

Low-cost open-source software-defined radio platform with hardware designs and firmware for RF transmission, reception, and signal analysis from 1…

Hardware tool for RFID analysis, emulation, and penetration testing. Supports 125kHz, 13.56MHz protocols (MIFARE, iClass, ISO14443/15693) with key…

Open-source hardware security toolchain for power trace capture, side-channel analysis, and glitching/fault-injection attacks on embedded devices and…

Firmware Analysis and Comparison Tool

Open-source hardware and software toolkit for reverse-engineering and communicating with infrared-based electronic shelf labels. Includes custom…

Deliberately insecure OpenWrt-based firmware for hands-on IoT security training. Features vulnerability challenges mapped to the OWASP IoT Top 10 for…

Multi-protocol firmware for a hardware hacking tool supporting SPI, I2C, JTAG, UART, 1-Wire, bus sniffing, logic analysis, and microcontroller…

Universal bus interface for hardware hacking and debugging, supporting I2C, SPI, JTAG, UART, and 1-Wire for sniffing, programming, and protocol…

Documents Intel and AMD x86 JTAG debugger hardware, connectors, probe software, and target platforms for low-level system debugging and firmware…

A vehicle network analysis and attack tool.

Independent IoT security research, vulnerability disclosures, and PoCs focusing on firmware analysis, hardware interfaces, and cryptographic flaws.

Reverse-engineered I2C/SMBus battery interface board for DJI Spark, replacing OEM smart battery with standard 3S LiPo. Includes protocol analysis,…

Comprehensive reverse engineering and exploitation of CVE-2019-17147, a stack buffer overflow in TP-Link TL-WR841N routers. Includes firmware…

Command injection exploit for TP-Link Tapo C200 camera (CVE-2021-4045) providing root shell access via UART and reverse-engineered uhttpd binary…

A Hardware Hacking Tool with Web-Based CLI That Speaks Every Protocol
