
Run Radmin VPN on Linux via Wine — custom driver, TAP bridge, zero packet loss
Run Radmin VPN on Linux through Wine: join networks, see peers, host and join game servers, no Windows VM.
I did not build this because it was easier than a VM. I built it because I thought it was easier than a VM.
Written by a human and Claude (Anthropic), with a lot of AI-assisted reverse engineering in Ghidra. It works, with no guarantees. Not affiliated with Famatech; Radmin VPN itself is downloaded from Famatech's servers, never shipped here.
It asks for your sudo password in order to run a Windows program through Wine, so be suspicious of it. Then check: every line of this wrapper is open source, and it takes less time than writing the accusation. (Radmin itself is Famatech's, downloaded from them and run unmodified.)
build.yml), and the build logs are public. GitHub records the sha256 of each release file: gh api repos/baptisterajaut/radmin-vpn-linux/releases/latest --jq '.assets[] | .name + " " + .digest'../RadminVPN-Linux-x86_64.AppImage --appimage-extract unpacks the AppImage into squashfs-root/: the launch scripts in usr/bin/, our binaries in usr/lib/radmin-vpn/, and a stock Wine build (Kron4ek) in wine/. Or skip all that and build it yourself.ip (the radminvpn0 adapter, its addresses and routes), sysctl (two settings on that adapter only), modprobe tun, nmcli (tells NetworkManager to leave the adapter alone) and firewall-cmd, nft or iptables (the firewall rule, removed on exit). Grep the scripts for sudo to check the list. Radmin's own request to configure its address goes through a relay that only accepts the exact ip commands it expects, never a shell.download.radmin-vpn.com, checked against a sha256 pinned in lib.sh. Nothing else, unless winetricks is installed, which then fetches a few DirectX libraries for the GUI.Download RadminVPN-Linux-x86_64.AppImage from the latest release. Wine is bundled, nothing else to install.
chmod +x RadminVPN-Linux-x86_64.AppImage
./RadminVPN-Linux-x86_64.AppImage
The first launch opens a terminal, downloads the Radmin installer this project is tested against, installs it and asks for your sudo password (needed for the network adapter). It takes a few minutes. Later launches only ask for the password and open the Radmin window. Closing that window stops the VPN.
If something goes wrong, a terminal opens on the log. You can also start the AppImage from a terminal to always see what it does. Everything it keeps (Wine prefix, adapter MAC, run.log) is in ~/.local/share/radmin-vpn-linux/.
Other ways to run it: from source, on NixOS, on a headless server. How it works inside: docs/architecture.md.
| Option | What it does |
|---|---|
--update | Upgrade Radmin to the version this release is tested against. Keeps your prefix and your Radmin ID. |
--installer <path> | Use this Radmin_VPN_*.exe instead of downloading one (first install only). |
--no-ui | Run the VPN without the Radmin window. |
--no-firewall | Leave your firewall alone. By default incoming traffic on the VPN adapter is allowed while Radmin runs. |
--no-fix-chat | Don't patch the Qt library that crashes Radmin when a chat message arrives. |
--no-broadcast-routes | Don't send broadcast and multicast traffic through the VPN (see LAN games below). |
--filter-ui | Open a small packet-filter window next to Radmin. |
When you open an issue, attach ~/.local/share/radmin-vpn-linux/run.log. It contains a diagnostics block whenever the start goes wrong.
"Another app is blocking the connection. Check if you have a VPN or security program running." On Linux that "security program" is your firewall (firewalld, ufw, nftables), and the symptom is that you can reach your friends but they can't join anything you host. Since 1.1.1 the launcher allows incoming traffic on the VPN adapter for the session. If the banner stays, it is another VPN or tunnel (Tailscale, WireGuard, a work VPN, a proxy like sing-box or clash): stop it, or exclude 26.0.0.0/8 from it.
Radmin closes by itself. Two known causes. Someone sent you a chat message: fixed by default since 1.1.1, update. Or Radmin's own updater installed a newer version inside the running prefix: run the AppImage with --update once, then turn off "Automatic updates" in Radmin's settings.
Radmin stays offline after an update or a restart. Look for Service was powered off before shutdown in the log: Radmin remembers that you switched it off. Click the power button in the Radmin window.
Registered, but never "ready". The log shows Registered as #… and then the start times out. Usual causes: a proxy or tunnel that intercepts outgoing connections (same fix as above), or a DNS resolver that never answers reverse lookups of private addresses (a docker0 interface is the usual trigger). For the second one, contrib/run-in-netns.sh works around it; read its header first, it keeps the VPN inside a network namespace.
LAN games don't see each other. Games find each other with broadcast and multicast, so the launcher routes 255.255.255.255 and 224.0.0.0/4 through the VPN while it runs. The side effect: Chromecast, printers or smart TVs on your home network may not be discovered during that time. --no-broadcast-routes turns it off.
Your other Wine apps broke after running Radmin (unimplemented function ndis.sys.NdisInitializeReadWriteLock). Versions up to 1.0.0 let Wine take over Windows file associations, so other .exe files started in the Radmin prefix. Run any version from 1.0.1 on once and it repairs both. To clean it by hand:
grep -rl 'WINEPREFIX=[^"]*radmin' ~/.local/share/applications --include='*.desktop' | xargs -r rm
rm -rf ~/.local/share/applications/wine/Programs/"Radmin VPN"
update-desktop-database ~/.local/share/applications
Reverse engineering and the Wine shim: @baptisterajaut.