
proxmark3
Hardware tool for RFID analysis, emulation, and penetration testing. Supports 125kHz, 13.56MHz protocols (MIFARE, iClass, ISO14443/15693) with key…

Hardware tool for RFID analysis, emulation, and penetration testing. Supports 125kHz, 13.56MHz protocols (MIFARE, iClass, ISO14443/15693) with key…

A suite of WiFi/Bluetooth offensive and defensive tools for the ESP32

Exploit Development and Reverse Engineering with GDB & LLDB Made Easy

Raspberry Pi Pico Arduino core, for all RP2040 and RP2350 boards

Independent IoT security research, vulnerability disclosures, and PoCs focusing on firmware analysis, hardware interfaces, and cryptographic flaws.

EMBA - The firmware security analyzer

Multi-purpose WiFi penetration testing toolkit for M5Stack devices. Performs network scanning, evil-twin attacks, deauthentication, captive portal…

The open-source wireless research platform for ESP32.

This repository provides a centralized resource for operational cyber defense and offense, compiling Theory, Tools, Operating Procedures, and…

Flipper Zero firmware source code

Firmware repository for CatSniffer, a multi-protocol IoT security research board supporting BLE, Zigbee, Sub-1 GHz, and more, with version-specific…

Low-cost open-source software-defined radio platform with hardware designs and firmware for RF transmission, reception, and signal analysis from 1…

Official OpenOCD Read-Only Mirror (no pull requests)

No-open firmware exploit for the Wyze WLPA19CV2 color bulb

A Hardware Hacking Tool with Web-Based CLI That Speaks Every Protocol

A Curated list of Security Resources for all connected things

Open-source hardware security toolchain for power trace capture, side-channel analysis, and glitching/fault-injection attacks on embedded devices and…

From a bare PCB to root: hardware-hacking a ZyXEL P-870HN (BCM6368) over UART — CVE-2025-0890 + CVE-2024-40891, on my own hardware.