dnatividade/arduino_mousejackMousejack for Arduino UNO
Arduino Mousejack is a project, based on uC_mousejeck by insecuritythings, to get Mousejack attacks into a small embedded device, with the form factor of a key chain.
Prototype Mousejack Device
Building the device is straight-forward, and the code provides a tool to use Duckyscript to launch automated keystroke injection attacks against Microsoft and Logitech devices.
Components list:
The Fritzing diagram below shows the wiring layout used in the prototype design:
To build the software, download and install the PlatformIO IDE.
Before building the software, be sure to modify the attack.h file using the attack_generator.py script:
Arduino-mousejack $ cd tools
tools $ ./attack_generator.py ducky.txt
In the example above, the ducky.txt file contains our Duckyscript. The attack_generator.py script will "compile" the ducky script into the attack.h file, which is included in main.cpp. This simplifies the code and makes it more compact.
Once you power the device on, the internal LED connected to pin 13 (called ledpin in the code), will blink two times for each pass over the entire channel range. When it sends an attack, the LED will glow solid.
If you monitor the serial port using the PlatformIO IDE, you will see the radio information details and a lot of debugging information being printed while scanning and during attack.
Warning: No interaction is required to initiate an attack.
More information about the tests performed, as well as the difficulties encountered, can be found in the testing directory.
As future work: