Advanced example

This example demonstrates how to use the tabi module in order to detect all possible BGP hijacks seen from a BGP collector.

Requirements

WARNING: Before trying this example make sure you have at least 2GB of free memory on your computer

The installation procedure is described in the main README.

MRT parser

This example is compatible with mabo and bgpreader.

Detect the hijacks

python detect_hijacks.py -c rrc01 -i mabo \
    --rpki-roa-file roa.csv \
    --irr-ro-file routes.csv \
    --irr-mnt-file maintainers.csv \
    --irr-org-file organisations.csv \
    ../../{bview,updates}.*.gz

This example script prints the abnormal events that were detected by the tabi module. Additionnaly it tries to filter out the conflicts that are most probably legitimate using the following methods:

the conflicting announce is covered by a ROA
the conflicting announce is covered by a route object
there is an administrative relation between the two conflicting AS
the AS_PATH of the hijacker contains the ASN of the hijacked

These heuristics are documented in the tabi.annotate module.

Interpreting the results

Update example

In this example, the announce updating the route of 2403:8600:ea89::/48 originating from AS55441 leads to the probable redirection of the traffic that

was initially directed towards AS131317. This is suspicious because there are valid route object and ROA for the original route but not for the latest route update.

{
   "timestamp" : 1451609472,
   "collector" : "rrc01",
   "peer_ip" : "2001:7f8:4::7992:1",
   "peer_as" : 31122,
   "announce" : {
      "prefix" : "2403:8600:ea89::/48",
      "asn" : 55441,
      "as_path" : "31122 6939 6453 4755 45820 55441",
      "type" : "U"
   },
   "conflict_with" : {
      "prefix" : "2403:8600:ea89::/48",
      "asn" : 131317,
      "valid" : [
         "apnic",
         "roa"
      ]
   },
   "type" : "ABNORMAL"
}

timestamp: when the announce was received (UTC timestamp)
collector: which BGP collector received the announce
peer_ip & peer_as: which BGP peer received the announce
announce: information about the announce
- type: either U if the announce was received from a BGP update or F if it was from a BGP full view
conflict_with: information about the RIB entry conflicting with the announce
- valid: route objects or ROA on the couple prefix & asn

Withdraw example

In this example the announce withdrawing the route 23.192.176.0/20 from AS5570 leads to the probable redirection of the traffic towards AS35889 which is announcing a route to the less specific prefix 23.192.0.0/11.

{
   "timestamp" : 1451609643,
   "collector" : "rrc01",
   "peer_ip" : "195.66.224.138",
   "peer_as" : 2914,
   "withdraw" : {
      "asn" : 55740,
      "prefix" : "23.192.176.0/20",
      "type" : "W"
   },
   "conflict_with" : {
      "prefix" : "23.192.0.0/11",
      "asn" : 35994
   },
   "type" : "ABNORMAL"
}

timestamp: when the announce was received (UTC timestamp)
collector: which BGP collector received the announce
peer_ip & peer_as: which BGP peer received the announce
withdraw: information about the withdraw
conflict_with: information about the RIB entry conflicting with the announce

tabi — Updated!

Categories