WakeMeOnLan v1.71 - Turn on computers on your network with Wake-on-LAN packet
This utility allows you to easily turn on one or more computers remotely
by sending Wake-on-LAN (WOL) packet to the remote computers.
When your computers are turned on, WakeMeOnLan allows you to scan your
network, and collect the MAC addresses of all your computers, and save
the computers list into a file.
Later, when your computers are turned off or in standby mode, you can
use the stored computers list to easily choose the computer you want to
turn on,
and then turn on all these computers with a single click.
WakeMeOnLan also allows you to turn on a computer from command-line, by specifying the computer name, IP address, or the
MAC address of the remote network card.
System Requirements And Limitations
- On the computer that you run WakeMeOnLan: WakeMeOnLan works on any version of Windows, starting from Windows 2000 and up to Windows 8, including x64 versions of Windows.
- On the remote computer: WakeMeOnLan can turn on the remote computer only if this feature is supported and enabled on the remote computer. Be aware that Wake-on-LAN feature only works on wired network. Wireless networks are not supported.In order to enable the Wake-on-LAN feature on the remote computer:
- On some computers, you may need to enable this feature on the BIOS setup.
- In the network card properties, you should go to the 'Power Management' and/or 'Advanced' tabs of the network adapter, and turn on the Wake-on-LAN feature.
Start Using WakeMeOnLan
WakeMeOnLan doesn't require any installation process or additional dll files. In order to start using it,
simple run the executable file - WakeMeOnLan.exe
After running WakeMeOnLan, the first thing to do is to scan your network
and collect the MAC addresses/computer names/IP addresses on your
network.
In order to start the network scan, simply press F5. If WakeMeOnLan
scans the wrong IP addresses range,
you can stop the scan process by pressing F6, and then go to the
'Advanced Options' window (F9), and
choose the correct IP addresses range to scan.
All the computers information collected by WakeMeOnLan is saved into the
configuration file (WakeMeOnLan.cfg) for loading
it on the next time that you use WakeMeOnLan. You can also scan your
network multiple times, and if there is a new computers on
your network, it'll be added to the list. Scanning your network also
updates the current status of every computer - 'on' (green icon) or
'off' (red icon).
If there are obsolete computers on the list, you can remove them by
using the 'Delete Selected Items' option.
Turn On Remote Computers On Your Network
After scanning your network in the first time, it's very easily to turn on the computers you need.
Simply run WakeMeOnLan, select the desired computers, and then choose the 'Wake Up Selected Computer' option (F8).
After using the 'Wake Up Selected Computer' option, you can run another network scan,
to verify that the computers are really turned on. Turned on computers are displayed with green icon.
External MAC Addresses File
WakeMeOnLan uses an internal MAC Addresses database in order to display the company name of every network adapter.
However, the internal database is not always updated with the latest MAC address assignments.
You can manually download the latest MAC addresses file from http://standards-oui.ieee.org/oui.txt
and then put oui.txt in the same folder where WakeMeOnLan.exe is
located.
When you run WakeMeOnLan.exe, it'll automatically load and use the
external oui.txt instead of the internal MAC addresses database.
Turn On a Computer From Command-Line
WakeMeOnLan allows you to wake up a computer on your network without displaying any user interface, by using the /wakeup
command-line option.
You can specify the computer name, IP address, or the free user text that you typed in the properties window,
as long as the computer information is stored inside the .cfg file.
You can also specify the MAC address of the remote network card, even if the computer is not stored in the .cfg file.
Optionally, you can specify the port number in the second parameter, and broadcast address in the third parameter.
Examples:
WakeMeOnLan.exe /wakeup 192.168.1.25
WakeMeOnLan.exe /wakeup Comp01
WakeMeOnLan.exe /wakeup Comp02
WakeMeOnLan.exe /wakeup 40-65-81-A7-16-23
WakeMeOnLan.exe /wakeup 406581A71623
WakeMeOnLan.exe /wakeup Comp02 30000 192.168.0.255
WakeMeOnLan.exe /wakeup 192.168.1.25 20000 192.168.1.255
You can also wake up all computers in the list by using /wakeupall command-line option.
Like in the /wakeup command-line option, you can optionally specify broadcast address and port number.
Examples:
WakeMeOnLan.exe /wakeupall
WakeMeOnLan.exe /wakeupall 20000 192.168.2.255
If you want to wake up all computers in specific IP addresses range, you can use /wakeupiprange command-line option
Examples:
WakeMeOnLan.exe /wakeupiprange 192.168.0.25 192.168.0.100
WakeMeOnLan.exe /wakeupiprange 192.168.0.11 192.168.0.20 20000 192.168.0.255
Scan Your Network From Command-Line
WakeMeOnLan allows you to scan your network and update the computers
list on the .cfg file without displaying any user interface,
by using the /scan command-line option:
WakeMeOnLan.exe /scan
You can also specify specific IP addresses range to scan, for example:
WakeMeOnLan.exe /scan /UseIPAddressesRange 1 /IPAddressFrom 192.168.1.1 /IPAddressTo 192.168.1.254 /UseNetworkAdapter 0
| /IPAddressFrom <IP Address>
/IPAddressTo <IP Address> | Specifies the IP adderess range to scan. |
| /UseIPAddressesRange <0 | 1> | Specifies whether to scan with specific IP addresses range (Specified in /IPAddressFrom and /IPAddressTo command-line options)
0 = No, 1 = Yes |
| /UseNetworkAdapter <0 | 1> | Specifies whether to scan the IP addresses range of the specified adapter (/NetworkAdapter)
0 = No, 1 = Yes |
| /UseNetworkAdapter <Name> | Specifies the network adapter name when /UseNetworkAdapter is 1 |
| /MacAddressFormat <1 | 2 | 3> | Specifies the MAC address format to display:
1 = XX-XX-XX-XX-XX-XX 2 = XX:XX:XX:XX:XX:XX 3 = XXXXXXXXXXXX |
| /UseNetBios <0 | 1> | Specifies whether to use NetBIOS scan.
0 = No, 1 = Yes |
| /cfg <Filename> | Start WakeMeOnLan with the specified configuration file.
For example:
WakeMeOnLan.exe /cfg "c:\config\won.cfg" WakeMeOnLan.exe /cfg "%AppData%\WakeMeOnLan.cfg" |
| /stext <Filename> | Save the list of computers that you previously scanned into a simple text file. |
| /stab <Filename> | Save the list of computers that you previously scanned into a tab-delimited text file. |
| /scomma <Filename> | Save the list of computers that you previously scanned into a comma-delimited text file (csv). |
| /stabular <Filename> | Save the list of computers that you previously scanned into a tabular text file. |
| /shtml <Filename> | Save the list of computers that you previously scanned into HTML file (Horizontal). |
| /sverhtml <Filename> | Save the list of computers that you previously scanned into HTML file (Vertical). |
| /sxml <Filename> | Save the list of computers that you previously scanned into XML file. |
| /sort <column> | This command-line option can be used with other save options for sorting by the desired column.
If you don't specify this option, the list is sorted according to the last sort that you made from the user interface.
The <column> parameter can specify the column index (0 for the first column, 1 for the second column, and so on) or
the name of the column, like "Computer Name" and "Workgroup".
You can specify the '~' prefix character (e.g: "~MAC Address") if you want to sort in descending order.
You can put multiple /sort in the command-line if you want to sort by multiple columns.
Examples:
WakeMeOnLan.exe /shtml "c:\temp\WakeMeOnLan.html" /sort 2 /sort ~1 WakeMeOnLan.exe /shtml "c:\temp\WakeMeOnLan.html" /sort "Workgroup" /sort "Computer Name" |
| /nosort | When you specify this command-line option, the list will be saved without any sorting. |
WakeMeOnLan v1.71 - Turn on computers on your network with Wake-on-LAN packet
Reviewed by Zion3R
on
11:56 AM
Rating:
Reviewed by Zion3R
on
11:56 AM
Rating:
